AM Shoot Out Results

[RocklandRX1]

For those interested....I pulled this from AM SNOW.

No doubt if Buster696 (Mike H.) was there...the results would have been different! :evil: :wink:


I just got back from the shootout. I will list only the best time and MPH for the best stock result, and the best dealer prep result.
600 class: Pol- stock-13.644--86 MPH
dealer prep-12.855--90 MPH
Cat- stock-12.886--92.04MPH
dealer12.515--94.40MPH
Doo- stock-13.582--85.42MPH
dealer-12.912--91 MPH
Yam- stock-14.392--77 MPH
dealer 14.034--76.06MPH

700 class: Pol- stock-13.220--89.14 MPH
dealer-12.305--93.68 MPH
Cat- stock-12.455--92 MPH
dealer-12.255--99.50 MPH
Yam- stock-15.723--69MPH
dealer-16.702--64 MPH
Somethng was wrond with the Viper!
800+ class Pol-stock-12.850--90MPH
dealer-12.295--94.40MPH
900 Cat-stock-12.369--93MPH
dealer-11.940--97.14 MPH
Doo- stock-12.825--89 MPH
dealer-12.680--87.87 MPH
Yamaha RX-1 stock-12.857--90.20MPH
dealer-12.815--91.13MPH

 

[RocklandRX1]

These are unofficial by the way.

 

[1Gunner]

600cc Cat- stock-12.886--92.04MPH
dealer prep 12.515--94.40MPH
vs.
Yamaha RX-1 dealer prep-12.815--91.13MPH

ouch!!! that sure sucks.... I can hear the chest thumpin already

Was there an RX-1 turbo there? how did it perform?

 

[Mighty]

I wanna know what the dealer prep consists of for the f-7

Cat- stock-12.455--92 MPH
dealer-12.255--99.50 MPH


:shock:

 

[Buckeye]

CAT PREP

Big bore, porting,etc................

 

[rightarm]

Hey Gunner how are the condition's in the Ottawa Valley,Plevna,Ompha,etc .

 

[Buster696]

I can not tell you guys how frustrating it is to see these results. Yesterday was the "ONLY" planed day for testing the RX1 and it was a rain out. Soooo, Big Moose Yamaha just through on the setups from last year in the primary (Gen2-Heel-Clickers w/White Spring) and Team Roller Secondary)... :evil: on the RX1.

Also, there was no planed testing at all on the 600Venom and 700Viper. Last years setup was used on these two sleds... :shock:

I'm sorry I did not push for some type of testing with the setup that I had with me...

Again sorry guys, :cry:
--Buster696--

 

[Bob Miller]

If I'm not mistaking, last years best time for the RX-1 with the POS track was around a 12.3 @ 96 MPH :shock: You would think that it would have done better this year with the RIP SAW :roll:
Somethings wrong with this picture :twisted:
I wonder how the Warrior would have done :?:

 

[angleboy]

what were the conditions?warm,cold,snow,ice,grass,mud?

 

[Bob Miller]

Here are last years results:

Port-A-Tree Shoot-Out 13 Official Results: 800+cc Class

Sled 60' ET 660' MPH 660' ET 1000' MPH 1000' ET 1320' MPH 1320' ET
ZR 900 Box 1 1.794 80.65 7.823 90.54 10.436 93.56 12.799
ZR 900 Box 2 1.739 NA NA 89.46 10.392 96.98 12.749
ZR 900 Dealer 1 1.664 87.89 7.341 98.68 9.790 102.97 11.999
ZR 900 Dealer 2 1.595 85.23 7.299 98.25 9.773 100.45 11.989
800 ProX Box 1 1.865 78.81 8.255 87.04 11.012 88.93 13.520
800 ProX Box 2 NA 78.40 8.107 83.49 10.899 90.18 13.433
800 ProX Dealer 1 1.605 85.71 7.472 92.02 10.073 96.77 12.413
800 ProX Dealer 2 1.642 82.27 7.634 91.28 10.269 96.15 12.634
Rev 800 Box 1 1.762 83.18 7.679 90.00 10.309 95.74 12.689
Rev 800 Box 2 1.894 84.43 7.736 91.09 10.326 97.61 12.656
Rev 800 Dealer 1 1.681 85.88 7.409 96.15 9.922 101.58 12.172
Rev 800 Dealer 2 1.694 86.04 7.468 96.36 9.983 101.35 12.242
RX-1 Box 1 1.824 78.12 8.110 86.87 10.806 91.46 13.237
RX-1 Box 2 1.863 80.21 7.967 87.89 10.610 96.77 12.962
RX-1 Dealer 1 1.777 85.71 7.672 92.02 10.252 95.74 12.565
RX-1 Dealer 2 1.722 85.23 7.543 92.59 10.094 96.98 12.389 This year should have run better! What happened?

 

[touched]

The F-7 sure was flying WOW! :shock:

 

[Straightliner]

I for one, am not happy with Big Moose Yamaha doing the testing for Yamaha. You could tell that there wasn't much time spent. It was a big joke. The way it looks is to me is that D&D is doing the clutching for arctic cat on the sleds for Big Moose and Yamaha is done by Big Mooses men. Am I right or Wrong? The boys that got there act together were the Polaris team they worked like bees. Sleds were wheeled to start line, No idling at start line, No backing up in reverse at start line, sleds brought to proper temp,lube on slides.

 

[welterracer]

I for one, am not happy with Big Moose Yamaha doing the testing for Yamaha. You could tell that there wasn't much time spent. It was a big joke. The way it looks is to me is that D&D is doing the clutching for arctic cat on the sleds for Big Moose and Yamaha is done by Big Mooses men. Am I right or Wrong? The boys that got there act together were the Polaris team they worked like bees. Sleds were wheeled to start line, No idling at start line, No backing up in reverse at start line, sleds brought to proper temp,lube on slides.

I tottally agree..

I heard last years set up was a guess set up from a phone call to some of the guys who are on TY!! NO TESTING!!

 

[Buster696]

straightliner, Guess what... You hit the nail on the head!!! two days before the shoot out, Big Moose did do some testing... It was on the AC's only!!! The day before the shootout no testing with the Yamaha's due to a very wet track.

--Buster696--

 

[RX1 Yooper]

I'm shocked. The people on this site, can take a bone stock, brand new, unstudded RX1. and whip 8 and 9 hundreds, that have studs, clutch kits, and pipes, and this happens. I don't get it.