gonnaride
Newbie
- Joined
- Feb 7, 2007
- Messages
- 9
- Reaction score
- 0
- Points
- 281
Pulled the seals off the jack and drive shafts. Sled has about 4800 km on it, bearing 's were clean, no water on gunk; added some grease with needle fitting. So, my question is, the people with bearing problems, do you park your sled in a heated area in winter? Mine stays in unheated garage from start of ride season to end.
Canadian Lad
Extreme
I had my bearings changed also with about the same mileage. When I checked them out afterwards they were also in good shape. I also do not park in a heated area.
Vectornut
TY 4 Stroke Junkie
- Joined
- Nov 18, 2007
- Messages
- 526
- Reaction score
- 30
- Points
- 878
- Location
- Eden, Vermont
- Country
- USA
- Snowmobile
- RS Vector
I want to change both the jackshaft and drive shaft bearings on my 05 Vector ER. How much of a problem is it to change them both. What is the procedure to do this? This has been the most trouble free sled I have ever owned. I have 4300 miles on the sled. Thanks Mike from Eden, Vt.
