clutch kits

[vicman]

I know almost nothing about clutching and am trying to read up on what I can to learn. I have an 06 rtx that I just extended to a 144 with a 1.75 backcountry track using a tracks USA rail extension kit. I also have installed a Hauck exhaust and ram air lid. I'm looking for a power commander or other type of fuel controller right after Christmas and will then be looking for a clutch kit. I'm looking for some advise on what to go with as far as clutching goes. I ride a mix of on trail and off trail. I see a lot of guys have the heel clicker drag n fly clutch kits where can you buy these and will it be a good match for the things I have done to the sled? Any advice will be helpful.

 

[copo427ss]

I would change your top gear to a 22. You'll need a chain also. I'm happy with my pioneer clutch kit. But in ur sled I would call ulmer racing and tell them what you have done and your riding style. He will put a clutch kit together for you. You can also get a pc from him too that will have his proven tunes already loaded in.

 

[ZapeX2]

Like what was said above,, if you go with Ulmers, he will get you what you need with little to zero tuning after. I've had 2 of his kits and they work great, he knows what he is doing....

 

[yamahatd]

A package from one supplier is what I would recommend. That way they work together. Ulmer products are proven and work well.

 

[elcho keith]

X2...Ulmer!

 

[vicman]

Thanks ill probably give him a call right after Christmas. Anyone have the heel clicker drag n flys with similar mods as me?