CPR/BENDER (front/rear)

Blue shadow

TY 4 Stroke Guru
Joined
Apr 23, 2003
Messages
895
Reaction score
0
Points
871
Location
CANADA NL
Need a heads up for this winter.I will be running a CPR turbo at 16 psi at 975 ft on hard pack snow,no studs for this event.I was talking to a friend last night ,he said that a bender unit was coming my way with a 350 to 400 hp rear mount and he thinks the guy is 350 pounds . :exc: Will I stand a chance with this guy?
 
Now that i know you.. :tg:

You don't stand a #$%&* chance against a 350lb guy, he will definitely "squat you", but on a CPR Turbo running 16lb and his being a Bender rear mount i think by the time his is spooled you'll be long gone and he will have a hard time catching you in 600' now if he wants to run 1000' that might be a differant story unless you got a little of this :nos
to boot...


TB
 
Sorry, unless you're sled is way-way lighter than his, you don't stand a snowball's chance in hell if he's at 400hp. You'll be lucky to be at 300hp @ 16#'s.
 
i wouldn't worry about CLAIMED
hp, my lake race kit
WILL make over 300 hp with less than 20 lbs of boost. and that will be hard to beat in a short drag race, getting more than 300 to the ground takes some serious tunning, even IF he has it, without studs its worthless. we do have 550 hp availible if you want it. there isn't a competitors turbo even close to our race turbos. jeff
 
Thanks Jeff,I said 975 ft ,but its 875 ft.If I can t beat him I will go bigger .Hope to try it soon.I will have it tuned and ready to go .THANKS AGAIN
 


Back
Top