jdp1under
Expert
- Joined
- Oct 19, 2009
- Messages
- 362
- Reaction score
- 10
- Points
- 643
- Location
- CT, NO SNOWVILLE
- Country
- USA
- Snowmobile
- 2010 RS VECTOR GT LTX STOCK FOR NOW!
Hello guys I did a expert x conversion this year and I have put a few thousand miles on it and love it. I had set it up according to the manual for my riding style and weight and have not touched anything but the trasfer knob above the softness bar. I think its soft for me but I wanted to give it a run before making adjustments.
2003 rx1 151 expert x 1.25 ice ripper
set up code for skid is CD
riding agressive 5'8 230lbs
I was wondeing if i mess with the shocks or the shock angle?
Thanks jdp
2003 rx1 151 expert x 1.25 ice ripper
set up code for skid is CD
riding agressive 5'8 230lbs
I was wondeing if i mess with the shocks or the shock angle?
Thanks jdp
grader
TY 4 Stroke Master
the shocks have cam style adjusters at the bottom for preload adjustment. the shock angle raises or lowers ride height. the overload springs have 2 slots to choose from to control bottoming.
jdp1under
Expert
- Joined
- Oct 19, 2009
- Messages
- 362
- Reaction score
- 10
- Points
- 643
- Location
- CT, NO SNOWVILLE
- Country
- USA
- Snowmobile
- 2010 RS VECTOR GT LTX STOCK FOR NOW!
Thanks where should the overload spring be set?
grader
TY 4 Stroke Master
it depends on your weight and riding style. if you are a big guy or always jump the sled then set to max, lower hole on arm. i actually drilled an additional hole higher on the arm so the spring wouldent engage untill later, made the ride softer with less rebound.
jdp1under
Expert
- Joined
- Oct 19, 2009
- Messages
- 362
- Reaction score
- 10
- Points
- 643
- Location
- CT, NO SNOWVILLE
- Country
- USA
- Snowmobile
- 2010 RS VECTOR GT LTX STOCK FOR NOW!
Ok thanks ill be checking it out later this week im going to spend some time dialing in the skid.
Similar threads
- Replies
- 3
- Views
- 917