front shock setting for GYTR shocks

[srxtim26076]

i just picked up some gytr shocks for my 08 nytro. i loosened the springs quite a bit to reduce the bumper height but it still seems tippy. It is set at about 18 inches from the top of the bumper to the ground. When i had the fox floats on, the a arms were about parallel to the ground. the arms with the GYTR shocks are still at somewhat of an angle. what is a good bumper height to prevent the tippy behavior?

 

[STAIN]

did you try to set your ski stance to wide??

 

[nytroD]

fully unload the shocks and loosen the springs entill theres a tiny bit of pressure to hold the retainer in.