gapping spark plugs

[TurboMatt]

I hope this doesn't sound like to silly of a question.
I have a new set of NGK cr10ek plugs I am going to be putting in my sled. In anticipation of the turbo I want to gap them down to about .02". Whats the best way to do this? The normal parts store gappers don't work too well with the small prongs on these plugs.

 

[JIM]

I just tapped them gently on the work bench or vise until they are a bit smaller than 20 thou and re guage to .020 thou.

 

[TurboMatt]

I just tapped them gently on the work bench or vise until they are a bit smaller than 20 thou and re guage to .020 thou.

LOL,yeah that was my backup plan, I was just hoping there was a easier way I was missing.