Hand Warmer Quit Working

[TRiGGeR605]

Hey guys, my left hand warmer quit working on me the other day on my 2010 nytro. After doing some searching I see its a common problem on all sleds. What's the process to removing the old grip and replacing with a new grip? Also I see some guys going with the RSI gel grips, are these worth the extra money vs. the stock grips? Thanks.

 

[rbell14]

I'd get the Yamaheater. Sounds like most folks like it.

 

[sgilbert]

change the heater and get gaunlets, run on low and never burn one out again. be comfortable and quit suffering

 

[snoway]

the grips have 2 rivets that you will drill out with a 3/16" drill. The hand grip will them slide off.
Peel off the old grip heater and then scrape and remove the remaining foam/glue off. Use a glue disolver to make the final cleaning.
Install the new one in the same position as the old one and then the grip, rivet, ride.