handle bars

[noRplacmnt4displacmnt]

can anyone tell me how high of a riser block i can go with stright bars for my 04 rx without any cable mods?? thanks for the help

 

[Swiss Sledder]

2 inches, although you may have to slightly re-route them. You can higher by swapping out the stock cable with a mountain cable.

 

[2Blu4U]

U can go up 2" with a staight block or get a rox or powermadd pivot adapter with a 2"block...total 3.5" But since you are using a straight bar you need to measure how much of a rise you get out of a stock bar and then you can add that to your total riser block you use.

 

[noRplacmnt4displacmnt]

so with stock bars i can use a 2" riser and rox pivot adapter ?

 

[marc]

Can someone tell me if I can go with 2" with stock bars and cables. Thanks..

 

[2Blu4U]

so with stock bars i can use a 2" riser and rox pivot adapter ?

Yes I had just a two inch block and just recently went with a powermadd pivot adapter and a 2" block with no cable mods. Just make sure U have no binding after you set it up.

 

[maxdlx]

I just put a 2.5 powermade block riser on, and had to rotate the bars forward some to make it work. But it beats stock hands up. LOL Maxdlx