OneBadWarrior
Expert
Hey Guys,
Was wondering if you could help me with a project I am currently under taking... I am fitting a 153" MTX skid under my 05 Warrior RX1 and need some measurements from the MTX so that locating the skid in the Warrior will be correct. Measurements needed are from axle to front skid mounting point. From front skid mounting point to rear mounting holes and the last measurement is from top or bottom of tunnel to the both sets of mounting holes. Thanks!
John
Was wondering if you could help me with a project I am currently under taking... I am fitting a 153" MTX skid under my 05 Warrior RX1 and need some measurements from the MTX so that locating the skid in the Warrior will be correct. Measurements needed are from axle to front skid mounting point. From front skid mounting point to rear mounting holes and the last measurement is from top or bottom of tunnel to the both sets of mounting holes. Thanks!
John
Port-Parts
TY Advertiser
- Joined
- Sep 18, 2003
- Messages
- 1,033
- Reaction score
- 257
- Points
- 1,308
- Location
- Port Washington Wi
- Website
- www.portyamaha.com
- Country
- USA
- Snowmobile
- 2012 Nytro RTX
2018 Sidewinder BTX SE
John - sorry for the delay in seeing this post as I havent been on the forum much this summer (to many other distractions like atvs, motorcycles, and waverunners!) If you haven't got these measurements yet throw a post up on the Nytro Mountain forum and I'm sure someone will chime in with the info you need. Currently we only have a used Nytro around and it is kinda buried in our storage warehouse and would be hard for me to get to for that info. Hoping someone else was able to get you this info and you have your project well under way!
