Martens199
Expert
- Joined
- Oct 1, 2012
- Messages
- 262
- Reaction score
- 33
- Points
- 658
- Location
- Saskatchewan, Canada
- Country
- Canada
- Snowmobile
- 2008 Yamaha nytro 153 mcx190
2015 SRViper mtx se 162 mcx270
Ok so I leave for a trip in a couple days. Sled was shut off running at my house. Sat for a week in minus 30 degrees.... went to pull it into the shop and when I turned the key on all I get is the red light from the rollover valve blinking. No gauges, no crank, nothing. So I push down the little primer button on the rollover valve harness and boom everything's powered and the sled starts. Once I release the button everything dies and red light blinks again.
Any help! I'm in need of some quick help...
Any help! I'm in need of some quick help...
Martens199
Expert
- Joined
- Oct 1, 2012
- Messages
- 262
- Reaction score
- 33
- Points
- 658
- Location
- Saskatchewan, Canada
- Country
- Canada
- Snowmobile
- 2008 Yamaha nytro 153 mcx190
2015 SRViper mtx se 162 mcx270
Never mind got it fixed sorry guys! Tether was bad just a mad scramble over thinking things.
Vilas
Expert
- Joined
- Sep 6, 2014
- Messages
- 288
- Reaction score
- 137
- Points
- 338
- Location
- Urbana, Illinois
- Country
- USA
- Snowmobile
- 2014 Viper xtx, Thunder products clutch kit
Glad it's fixed, have a great trip and be safe!
Martens199
Expert
- Joined
- Oct 1, 2012
- Messages
- 262
- Reaction score
- 33
- Points
- 658
- Location
- Saskatchewan, Canada
- Country
- Canada
- Snowmobile
- 2008 Yamaha nytro 153 mcx190
2015 SRViper mtx se 162 mcx270
Thanks, excited to finally ride this sled to its potential now that I got the clutching tuned in!
