HID lights Big time improvement

[Nytro Nasty]

Here some pics of before and after may give you other ideas? Think I used 8-32 stainless bolts and rubber well nuts to mount. Lined ballasts with double face tape to prevent chaffing (prob over kill)? Would rather over build versus rework is my motto!!!

 

[Nytro Nasty]

 

[NS FX NYTRO]

Just installed the ddm kit on my nytro.

Couple of things, I used the supplied harness from ddm, wasn't willing to pay $40 for patch cables just to eliminate a couple wires! If using this harness and you ground the 2 wires to the lower steering loop like grizz suggested you'll need to take a drill bit and make the ends of the ground terminals larger in diameter. No big deal just a heads up. Everything just plugs into place and they are waaaaaay brighter than stock. The $2.99 mounting brackets for the ballasts work great, 3 little bolts/nuts (supplied) to secure the ballast to the supplied bracket and then mount to lower air box bolts.

35 watt, 4300k and not even a hint of blue! Just how I wanted it!