sifty
Extreme
I want to raise my handle bars. What kind of riser and how high can I go without purchasing extensions for my wires. THis is on a 2005 vector. Has anybody added any seat foam to the stock seat? and if so How much? Any tips would be appreciated.
Oak Hill
VIP Member
- Joined
- Dec 19, 2004
- Messages
- 540
- Reaction score
- 1
- Points
- 591
- Location
- Owosso, Mi
- Website
- www.airtoolexpress.com
From what I have read, 2" is the maxium riser or you will have to run longer cables.
WiVector
Extreme
yeop
I got 2 inch risers on mine, and I like it. I also debated adding foam to my seat to flatten it out completely;.
I got 2 inch risers on mine, and I like it. I also debated adding foam to my seat to flatten it out completely;.
sifty
Extreme
WIVECTOR- did you go with a regular block riser or an articulating one?
WiVector
Extreme
ok
I got the sportech one for like 35 bucks. It is a block but you can push your bars as far forward as you want. The thing that is bad about the block ones like the powermadd ones is that you have to use your stock handlebar clamps, then you can't push your bars very far forward. sportech ones are a lot better in my opinion.
I got the sportech one for like 35 bucks. It is a block but you can push your bars as far forward as you want. The thing that is bad about the block ones like the powermadd ones is that you have to use your stock handlebar clamps, then you can't push your bars very far forward. sportech ones are a lot better in my opinion.
p0wd3rp1l0t
VIP Member
2-3" with stock cables and hoses....i went a little over board...9" in total...stock wires still work tho
