06apexrtx
Expert
hey guys, what is the max rpm's that the vector should be turning? whats top speed give or take? it's an 07' gt w/ 960 miles. thanks 
suburban
Expert
84-8600 would be ideal.
ttw_walman
Extreme
Ok
I got an 05 Rage. 9000 miles. I took the pimary apart and all bushings seem pretty good. Brand new belt installed this week. When I hit the gas I go to around 8200 rpm and as I increase speed the R's drop to about 8000. I noticed it because my sled would usually hit 80mph real fast and then slowly increase. Now it hits 65 real fast and increases from there. Anybody got any ideas as to why I would see this.
Walman
I got an 05 Rage. 9000 miles. I took the pimary apart and all bushings seem pretty good. Brand new belt installed this week. When I hit the gas I go to around 8200 rpm and as I increase speed the R's drop to about 8000. I noticed it because my sled would usually hit 80mph real fast and then slowly increase. Now it hits 65 real fast and increases from there. Anybody got any ideas as to why I would see this.
Walman
06apexrtx
Expert
hows the belt? my wifes a had at 100 mph on the speedo and it does go slow say from 85 and up but gets to 85 fairly quick.
