Mono to SE suspension

doc

Lifetime Member
Joined
Jan 16, 2006
Messages
124
Reaction score
29
Points
983
Location
SE MN
Country
USA
Snowmobile
2015 Apex , 2013 Apex
Asking for a buddy ...
Does a SE suspension fit in the mono chassis?
I’m guessing that it does ,
and mono would fit in SE chassis ~~ just no adjust hole for the cable that is always broke
I’m correct ?
 
Asking for a buddy ...
Does a SE suspension fit in the mono chassis?
I’m guessing that it does ,
and mono would fit in SE chassis ~~ just no adjust hole for the cable that is always broke
I’m correct ?
Yes apex tunnels are the same, depending on the suspension length you may need different brackets or upper idler wheels,the newer mono2 suspensions were upgraded for strength etc& track length changed in 2011,if standard remote adjust shock its easiest to just cap the threaded connection on the shock where the cable attaches with a plastic cap to keep snow etc out& when needing to adjust remove plastic cap&adjust with a square drive bit or robertson type screwdriver or change shock type, the newer vector used the same mono 2
 
Asking for a buddy ...
Does a SE suspension fit in the mono chassis?
I’m guessing that it does ,
and mono would fit in SE chassis ~~ just no adjust hole for the cable that is always broke
I’m correct ?

you are correct. Only difference is the shocks. SE had the fox mega float and std apex had the kyb coil shock with tunnel adjuster.
 


Back
Top