• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

MTX track swap problems

bjerrang

Extreme
Joined
Mar 14, 2010
Messages
95
Location
Lerresfjord, Norway
Just swapped for a polaris 52mm track on my old phazer mtx.
Cut the egdes so it fits and turned the drivewheels due to wear.

Tried the snowmobile on a 1 minute run on mostly icy road.

The track clips was very warm and it had melted plastic from hyfax.

As i stood there scratching my head i saw that the polaris track on had 1 clip pr 4th row .
And the windows inbetween was no cut out.

Could this be the case ? , guess it worked on polaris earlier with this track.

Btw Iceage/timbersled rear end with close to 0 idlerwheels
 
Last edited:

i has issues with slides sticking on every sled i had with the closed every 3rd window track. worst was a 01 sx550r as it hated anything packed. clipping it would reduce a whole bunch of the sticking. at minimum you need to open those closed windows to let the snow in better for lube. did a 1990 et400 that way and it is running fine.
 
just cut the windows open and clip it yourself. did that once as it was cheaper than a new track.
 
just cut the windows open and clip it yourself. did that once as it was cheaper than a new track.

Have done that before too. Razor knife and a clip tool. Have also ran them just open without clips. Not great with extrovert drivers but can do.
 


Back
Top