Espen
Newbie
- Joined
- Feb 10, 2010
- Messages
- 9
- Reaction score
- 0
- Points
- 241
Hi, tried to start up a friends phazer turbo, and it halted after idling for 20 sec, showing error 30 that means no oilpressure.
Did some research and noticed that it dont have any pressure at all, it doesent even flow oil out of hoses or filterinlet.
New oil, filled up to level, checked that oilpumpchain is ok, and its turning when crancking the engine.
One thing i noticed is that its leaking pressure from cylinders to inside engine when sparks are in holes, and i jam the exhaust while crancking.
Can it be that the headgasket or the head is broken, and that oilpump looses all pressure there, or is there any other known problems that makes the oil pump completely stop working?
Any ideas on this one will help before we start stripping the engine.
Did some research and noticed that it dont have any pressure at all, it doesent even flow oil out of hoses or filterinlet.
New oil, filled up to level, checked that oilpumpchain is ok, and its turning when crancking the engine.
One thing i noticed is that its leaking pressure from cylinders to inside engine when sparks are in holes, and i jam the exhaust while crancking.
Can it be that the headgasket or the head is broken, and that oilpump looses all pressure there, or is there any other known problems that makes the oil pump completely stop working?
Any ideas on this one will help before we start stripping the engine.
mbarryracing
TY 4 Stroke God
- Joined
- Aug 31, 2007
- Messages
- 1,923
- Reaction score
- 192
- Points
- 1,078
- Location
- Springville NY
- Country
- USA
- Snowmobile
- 2006 Yamaha Attak Turbo
2015 SR Viper RTX-DX
1996 Vmax 600XT
You have an air lock after changing the oil... Happened on my Apex. Try leaning the sled on each side for a while, see if you can burp the air out of the pump.
