Wock
Newbie
- Joined
- Dec 1, 2017
- Messages
- 1
- Age
- 38
- Location
- Estevan
- Country
- Canada
- Snowmobile
- 2013 nytro mtx 162"
2013 nytro xtx
I have a 2013 nytro mtx 162". Put a new C.E track on it and I rides tight to the left side. Drivers are keeping in fro. Going any further left. Adjusters On Rear of the skid seems to have no effect on the front of the track.
Have had the skid out and it seems straight and square.
Drivers are in the right place on hex shaft. Shaft is straight.
Nothing on bulkhead is cracked or appears bent.
Has anyone else had this issue any help would be apprciated.
Also I did not notice if old track was running to the side befor removal.
Have had the skid out and it seems straight and square.
Drivers are in the right place on hex shaft. Shaft is straight.
Nothing on bulkhead is cracked or appears bent.
Has anyone else had this issue any help would be apprciated.
Also I did not notice if old track was running to the side befor removal.
