MNnytroturbo
Newbie
- Joined
- Nov 5, 2013
- Messages
- 10
- Reaction score
- 2
- Points
- 63
- Location
- Iron Range, MN
- Country
- USA
- Snowmobile
- 2011 yamaha nytro xtx 162"x2.5" , push turbo, mountaintech full skid plate,OFT roll over valve with tether, OFT steering relocater, Avid drivers, Rox 3" riser, timbersled front bumper, mtn air skid, roest dash vent, koso x2 guage, Scmidtt brothers clutching, homemade manual fan control for cooling underwood temps and more I can't remember
Looking for suggestions on clutching and gearing for the following
11 yamaha nytro xtx convertered to mtx
39 bottom gear reverse case
Push turbo 8psi
162"x2.5 ce
7 tooth avid drivers 3.0
I have a 21 tooth top gear , and an 18 now
8gl weights .
8dn belt
47' helix came with turbo kit
Schmidt comfort clutch primary spring
Would like to use yammie arms, posted on wanted section for 8fs or 8bu- right ones I should be looking for?
Weight 250 riding weight
Need suggestions for home 1500ft
And 8-9000 feet
40% trail, 60% off trail.
Thanks for any suggestions!!
11 yamaha nytro xtx convertered to mtx
39 bottom gear reverse case
Push turbo 8psi
162"x2.5 ce
7 tooth avid drivers 3.0
I have a 21 tooth top gear , and an 18 now
8gl weights .
8dn belt
47' helix came with turbo kit
Schmidt comfort clutch primary spring
Would like to use yammie arms, posted on wanted section for 8fs or 8bu- right ones I should be looking for?
Weight 250 riding weight
Need suggestions for home 1500ft
And 8-9000 feet
40% trail, 60% off trail.
Thanks for any suggestions!!
