Opinion Bergstrom ski saver.

[shockwave]

I have darting issues. My skis are C&A XTX with 6 inch shaper bar. I have checked my ski alignments, they are ½ tow. I reverse my rubber boots this weekend and will shim them latter. The ski savers were recommended to me on an other tread link below. I started to read on the ski savers and realized that they do correct darting issues and are available for my ski.

For those of you that used them, I have a few questions.

Do they really reduce darting?
What thickness should a get? ¼ or 3/8?
Will they work with my shaper bar?

http://www.ty4stroke.com/viewtopic.php? ... om&start=0

 

[mdkuni]

I have found 3/8" ski savers to be a great help with darting. They eliminated darting when I ran Slydog skis and made darting more manageable with Curve skis. I had no problems using them with Shaper bars.

 

[shockwave]

I have found 3/8" ski savers to be a great help with darting. They eliminated darting when I ran Slydog skis and made darting more manageable with Curve skis. I had no problems using them with Shaper bars.

Did you feel like you lost any bites when turning?

 

[mdkuni]

Conditions vary so much from day to day it is hard to tell for certain. What I can tell you is I was still completely satisfied with the skis in the corners even after the installation of the ski savers.

 

[shockwave]

Conditions vary so much from day to day it is hard to tell for certain. What I can tell you is I was still completely satisfied with the skis in the corners even after the installation of the ski savers.

Thanks for the info.