ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,503
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
Sounds like the CAT ones Ive seen...sorta look like a half moon? I know when they ice up they were an issue, but sure is alot better then the old bag which is riveted solid.Takes about two seconds. They have two 1/4 turn thumb nuts. Turn both a 1/4 turn and take bag off into hotel room. Exactly the reason I bought it vs other bags. If no one else posts a video I can after work.
Sounds like the CAT ones Ive seen...sorta look like a half moon? I know when they ice up they were an issue, but sure is alot better then the old bag which is riveted solid.
I’m not sure on the cat ones. Might be very similar. It’s a fairly good size round nut. Zippers are of good quality and seem to have a decent flaps to cover actual zipper. Last ride I had ice everywhere. It was freezing drizzle most of the day. No issues with any water getting in bag or zippers freezing. My jacket on the other hand not so much. Took 10 min at every stop to unthaw because I was warm and ride with jacket zipper cracked open at neck line.
**sj**
Lifetime Member
medium or large...call Kevin at port parts advertiser here
1049triple
Expert
- Joined
- Jan 19, 2009
- Messages
- 330
- Location
- Pohenegamook, Qc
- Country
- Canada
- Snowmobile
- 2025 SRX (on order)
2018 High Country 9000
2001 SRX 700
I dont know if its helping, but I run the Crosstrek Medium height on my High Country for long trips on really cold days.
Still had to drill two hole and put 2 insert to secure both bottim rear tabs on the side of the stock air intake. I dont have numbers as I am not home.
Still had to drill two hole and put 2 insert to secure both bottim rear tabs on the side of the stock air intake. I dont have numbers as I am not home.
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
is your sled a 129 ?View attachment 145179
I just put this one on my new winder. It’s the large version
Yamajon1
VIP Member
- Joined
- Nov 6, 2016
- Messages
- 954
- Location
- Oshkosh Wisconsin
- Country
- USA
- Snowmobile
- 2016 SR Viper RTX DX
Former Yamaha sleds:
2004 Venture 600 2002 SX Viper 700
1997 Vmax 600 SX 1994 Vmax 600 1989 Exciter
1986 Vmax 540 1986 Phaser 1981 SRX 440
I believe there is 3 sizes. Medium, Large and Extra LargeInteresting, so they have two sizes in this new design. Very nice!
137is your sled a 129 ?
Dr. FeeLGooD
VIP Member
The one on the pic I posted is the same as the one I have. Came with my sled. A PowerSurge xtx le 141. I am thinking of selling it. There are two sizes bigger, so the one I already replaced it with would be the middle size. There definitely is 3 sizes. Was just trying to figure out a fair price for it. Thanks all!!
Dr. FeeLGooD
VIP Member
I was thinking of keeping it and installing a link fuel tank behind it. Pretty sure it would fit on my 141. Then I started thinking of bent tunnelsI wonder if the linq sport bag would fit behind it ?
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.