Phazer clutching?

[terret725]

any one have any good clutching tips for the phazer?

 

[terret725]

any one?

 

[Srxspec]

We have a clutch kit that consists of a set of weights and primary spring if you're interested!

http://www.ty4stroke.com/viewtopic.php?t=33792

 

[terret725]

ill keep it in mind dont wanna just buy the first thing i find u know. im sure its a good kit could u tell me a bit more about it? i see on ur web site u have a dyno chart of HP vs MPH and a peak of like 50 hp. is that hp at the track im guessin right?

 

[Srxspec]

The kit includes a primary spring and adjustable weights. It gains low end and midrange acceleration as well as makes the sled snappier (backshifts quicker). Have run a best of 99 mph on the speedo in testing (88 mph radar). The Phazer is a real sleeper sled and a great sled for tight/twisty trail riding or ditch banging!

Do a search for Ulmer and Clutch in the Phazer forum and see how customers responded.
http://www.ty4stroke.com/search.php?mode=results

 

[Buster696]

I just installed this kit on a new 08 phazer. Even though we don't have snow the guy still wanted to take the sled out on the grass. So i told him to break in the motor a little (on the stand/short burst runs on the grass). I had him run the sled stock and then put this kit in. When he came back the first words were.... "WOW, that launches much harder than stock..." I took it for a run and would have to agree.

Allen, thanks for the research and testing on this kit. seems to work well...

--Buster696--

 

[obr]

Allen: Is there any changes in the clutch kit using stock track VS 1.5" freeride track?

 

[Srxspec]

obr, with freeride track, depending on rider weight, we sometimes adjust secondary to C-2 (up from stock A-1 setting) spring setting.

 

[SharkAttak]

i have the ulmer clutch kit in my phaser with over a 1000 mi. on it, it is worth it