Proline clutch Help?

[skmon]

Talked with John at Proline. Rips now. Traction was issue that night, spinned til it overshifted? or helix was wrong. But traction on my shorty is going to be an issue with my light butt. But aleast now when you let off gas you don't try to go over the handle bars.

 

[Reaper]

Talked with John at Proline. Rips now. Traction was issue that night, spinned til it overshifted? or helix was wrong. But traction on my shorty is going to be an issue with my light butt. But aleast now when you let off gas you don't try to go over the handle bars.

I am confused, talked to John and it rocks now ? What did he say ? What did you change ? There is only one Helix ?

 

[BADSLED]

Too much backshift- I bet he had the spring wound up too much like I did. It went like hell 0-80mph and then would peter out on top.

 

[skmon]

All I did was take secondary apart, poped off, so I don't know what it was set at for sure. Put back together. Ran lake again. 120 on dream meter and ran out of room. Still get alot of track spin. Adjusted transfer for more. About 3/4 out. Coming from Doo with RER, spring wrap was a thing of the past for me. I don't miss the 05 Mach Z!!

 

[Reaper]

All I did was take secondary apart, poped off, so I don't know what it was set at for sure. Put back together. Ran lake again. 120 on dream meter and ran out of room. Still get alot of track spin. Adjusted transfer for more. About 3/4 out. Coming from Doo with RER, spring wrap was a thing of the past for me. I don't miss the 05 Mach Z!!

So yuo are at 9/2 with aluminum rivet in the tip now ?

 

[skmon]

Yep, spin 10,800 to 11,000. About 550 miles on RTX.