Push Turbo on yamaha nytro xtx

[gregdec1]

I am considering installing a push turbo on my 2011 nytro xtx. I am from Manitoba Canada and ride trails/off trail powder. What is everyones thoughts on this turbo kit and will it work good for my riding. Also is it a simple plug and play system that does not require any modification to the engine as can I still run 87 Octane fuel or do i need to start running 91?

 

[Gauthier]

What altitude do you riding ?

 

[gregdec1]

Under 6000 Feet

 

[Gauthier]

I have it at sea level. The actuator on the kit is not good because I need to unscrew it to max....produce a lot of lag before boosting. I have order one 6 psi and I will try it tomorrow.

 

[Gauthier]

I have a 1 3/4 backcountry track with avid drivers. I race vs a dealer M1100t modded.

http://www.youtube.com/watch?v=jA_Bkbnm-DE

 

[petetown]

just ord this kitto run low elevation any info for me? also curious as to what gearing and clutching you guys are runnin?

 

[Gman900]

Just ordered kit thru Pats Yamaha MI kip has lots of knowlage on these kits at sea level be my first boosted sled caint wait till next winter.

 

[petetown]

Im lookin for a good clutch setup any tips?

 

[Dimebag]

You need to run 91 octane with the turbo installed.

 

[Dimebag]

Im lookin for a good clutch setup any tips?

I run the mcx weights with my mcx 180 kit.

Secondary spring wrapped 90 degrees.

I run the 41 degree helix which works good for my riding. A little more info about your sled and riding style would be good.

 

[f7straightliner]

Just pulled the trigger on a push kit.