RTX top speed?

[ReX]

I don't get any ratching either. I run my skid at full transfer, limiter straps at stock setting and really snug the track down. My sliders do not wear to bad either, but I have the low snow wheel kit installed and I am conscious about keeping the slides cool.

When you say "snug the track down" do you mean you tie it down or something?

What I found with my RTX was the lower the ride height, the less the track wanted to ratchet. With the suspension set up for only 3" worth of sag at the rear bumper it was difficult to keep the ratcheting under control (needed a very tight track, reduced weight transfer and a 1 hole tighter than stock limiter strap). On the other hand, with 8" worth of sag I could run the track loose and it wouldn't ratchet.

 

[Ported Hornet]

REX,

I run the tension pretty darn tight. I have a unconventional way of setting up my rear skid. I like but I find most others don't. I like to transfer hard and keep the skis in the air on the exit of a corner. I like a set up that is challenging to ride, I get bored easily.