Solution to Hyfax wear??

wheels

Have the wheels off a skidoo 05 rev with the 6205 bearings.The wheels are 135mm so I milled off 0.70 off the mount and the wheels fir perfectly between the drive lugs.Havent try this yet but it worked very well on my apex.It is the wheels that are inside the front of the rear suspension.Track turns over much easier than before.
 
I used the Hyperfax last year, went about 150 miles and they were gone, but this was midwest riding. If you have any dirt in the trails forget about it. They may work good if you are always in clean snow.
 
Vector1 said:
I used the Hyperfax last year, went about 150 miles and they were gone, but this was midwest riding. If you have any dirt in the trails forget about it. They may work good if you are always in clean snow.

Is this what you guys are talking about?

http://www.yamaha-motor.com/sport/produ ... etail.aspx

Or is this a different idea? I don't remember these on Yamaha's site before.
 
sheetwright said:
Vector1 said:
I used the Hyperfax last year, went about 150 miles and they were gone, but this was midwest riding. If you have any dirt in the trails forget about it. They may work good if you are always in clean snow.

Is this what you guys are talking about?

http://www.yamaha-motor.com/sport/produ ... etail.aspx

Or is this a different idea? I don't remember these on Yamaha's site before.

Nope - graphite slides are little better than what came on your sled. Check this instead.
http://snowmobile.off-road.com/snowmobi ... ?id=196030
 


Back
Top