blue sled
Newbie
- Joined
- Jan 8, 2008
- Messages
- 21
- Reaction score
- 0
- Points
- 211
when changing plugs remove the bolt on the caps and just pull hard? dont want to break anything thanks!
NY AttakGT
TY 4 Stroke Guru
After you undo each of the 10mm bolts on top of the boot, give the boot a twist back and forth while pulling them up. Dont forget to unplug the harness from each!
--Steve O.C.)
--Steve O.C.)
CaptCaper
VIP Member
- Joined
- Jan 1, 2007
- Messages
- 2,253
- Reaction score
- 185
- Points
- 1,283
- Location
- Northern N.H.
- Country
- USA
- Snowmobile
- 2016 RS Vector XTX 1.25 Lug wifes..2013 RS Vector LTX.. 2003 600 VMax Past Machines 3-2007 Attaks 1-2010 Vector LTX.. sorry no Stinkdoos or poo's cats.
I pryed them gentlty while pulling with a large slotted driver . I don't have the strength any more like I use too.
They aren't in the most perfect spots for getting good leverage.
I used the spark plug tool in the kit like others mentioned here and it worked good getting into these spots.
They aren't in the most perfect spots for getting good leverage.
I used the spark plug tool in the kit like others mentioned here and it worked good getting into these spots.
