Tuner skis and carbide choices

[ualav8]

For those with the tuner skis, what carbides are you running and where do you have them positioned- inside or outside positions?
I have a 2012 Apex XTX with no studs. Recommendations? (And stop yourself from saying different skis)

 

[34pontiac]

Skip that.
Snow trackers

 

[ualav8]

Skip that.
Snow trackers

Very helpful

 

[Teamblue4]

6 inside 4 outside but I have studs on my 12 Apex XTX

 

[Rtbo]

I have 6" shapers on the inside and 4" woodys on the outside on a 121 ice ripper. I have tried a lot of combinations and this is by far the best I have found

 

[34pontiac]

Tuner skis with snow trackers.
I have them on 15xtx. They're great.
That any better?

 

[FlyinA]

'15 SE with 128" track, no studs, 6" Yamaha stock inside and 4" Yamaha stock outside. Pushes a little in soft snow conditions, but I'm not done adjusting ski pressure, which has a dramatic effect too. I'm considering the switch to a single keel ski as I don't see the advantage of dual keels, and it seems like they would add a lot more drag and hinder top speed.

 

[crk1333]

2016 XTX with ice Cobra track previously the 1.25 track with a hundred studs. I have ace bars inside and out 6-inch carbides on all four. It works great with both tracks, well-balanced