LooseCannon
Expert
Is anyone running the USI Project X PX-301 skis. Looking to upgrade from factory skis to something a bit nicer. Was considering Simmons, C&A Ultra Pro XT's, and the USI's. Just looking for some opinions on any of them. I am a very aggressive trail rider and want to eliminate darting along with added floation. They all look like they have their individual advantages.
Thanks in advance
Thanks in advance

studdog
TY 4 Stroke Junkie
I did a review of then last week agter 1200 mile run in canada. Look up my post, great ski in many different conditions. studdog
NY_Nytro
TY 4 Stroke Master
- Joined
- Dec 24, 2004
- Messages
- 1,088
- Reaction score
- 2
- Points
- 591
- Location
- Grand Island, NY
- Website
- www.gi-snowmobiler.com
I have the VX-301, no complaints. Wider than stock skis and the tip is flexable so it should help absorb some bump feedback. My sled corners alot better but it is hard to say if it was the skis alone because I made changes to the suspension at the same time.
low slung
TY 4 Stroke Master
- Joined
- Feb 16, 2005
- Messages
- 1,419
- Reaction score
- 1
- Points
- 591
Had VX-301s on our previous sled. Very tough, ran 7 miles through boulder field with 6 inches of snow/stock plastics were leaving shavings every 6 feet. USIs came through with only some gouges. Rear position mount made steering electric-like. Better than steels/most stock plastics but not worth the difference compared to the warrior plastics. Those new concave runners are supposed to make stock plastics better than aftermarket skis.
Similar threads
- Replies
- 3
- Views
- 1K