YamaBert
Extreme
YamaBert
Extreme
Sorry bad lighting in the garage at night......post some pics in the snow next time I get out. Also, still have to get the studs on and some graphics on the front hood. Let me know what you think. Also paint on hood is tough to see in lighting but it is a black with the flake in it.
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Age
- 64
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
I really like the combination! HAve seen a few others with black and white. Get some outdoor pics showing the flake on the paint.YamaBert
Extreme
adrenaline junkey
Expert
looks good
Yeller
TY 4 Stroke Junkie
Very cool!
Badarse. Nice job!
Those graphics look great. Noticed you have the slydog wheels too, how you like those? How was the install on them, and mods? Thinking about getting a pair for mine. Love the color scheme you got goin on.
YamaBert
Extreme
Well....I had a few of my stock bogey wheel bearings seize up on me so I said might as well get the slydog bogies if I already got the skis. Install on the slydog bogies is a pain in the arse because the outside spacers need to be machined down because the bearings in the slydog wheels are wider than the stock ones which causes a problem. The front set of bogeys are also a pain in the #*$&@ because you have to unbolt a few things in your suspension and move them out of the way in order for you to feed the bolt through the hole and wheel. Other than that I like them a lot! They do work awesome and look pretty cool.
MCApex44
TY 4 Stroke Guru
- Joined
- Mar 30, 2006
- Messages
- 973
- Location
- Western New York, Chautauqua County
- Country
- USA
- Snowmobile
- 2014 Viper RTX SE (sold)
Your sled looks great!
Paul61001
Newbie
hey how hard was it to install the stickers. they are arctic fx graphics right. i wanted to do it to my phazer but i didnt like that i would have to cut them out instead of precut. thanks
YamaBert
Extreme
Yea....you have to cut them out from the paper they are printed on which takes a little time and patience if the stickers have a lot of contours to them.
The actual install was not too bad(Im a first timer at doing any kind of this). Just make sure you get the application/cleaning fluid kit with the decals and follow the instructions and you should be fine. Start with the big graphics first and then finish with the small ones. Once I got past putting the first decal on and figuring out what worked best it was a breeze. Good luck!
The actual install was not too bad(Im a first timer at doing any kind of this). Just make sure you get the application/cleaning fluid kit with the decals and follow the instructions and you should be fine. Start with the big graphics first and then finish with the small ones. Once I got past putting the first decal on and figuring out what worked best it was a breeze. Good luck!
