sxviperfan
Extreme
HEY FELLAS, I HAVE AN 03 RX1 WARRIORIZED WHICH HAS A 136 1.25 RIPSAW AND 217 STUDS. I ALSO HAVE HEAVY HITTERS SET TO MATTS SPECS AND THE ECP KIT W/EVAP. MY QUESTION IS, SHOULD I RUN A NEW YAMAHA BELT OR IS THERE A BETTER AFTER MARKET BELT TO RUN? THANKS SCOTT 
Red2003
TY 4 Stroke Guru
Yamaha.
Swiss Sledder
TY 4 Stroke God
2nd Vote for Yamaha belt. Why? Most guys on this site use the Yamaha belt and there have been very few issues.
neonphil
Expert
Yamaha
Hookman49
Extreme
Nothing but Yamaha
Mighty
TY 4 Stroke God
- Joined
- Apr 17, 2003
- Messages
- 4,794
- Age
- 61
- Location
- Grand Ledge Michigan USA!
- Country
- USA
- Snowmobile
- 22 Mach Z
23 Sidewinder SRX
The verdict appears to be in, OEM 
jimmie d
TY 4 Stroke Master
Yamaha, kind of non-applicable concern today as belts last for a couple thousand miles.
Jim
Jim
The 8DN belt is awesome. Stick with the Yamaha
RX-Dave
Expert
- Joined
- Nov 14, 2004
- Messages
- 308
Hackers has them on sale for $50.95 right now (at least Saturday they did)
RobX-1
VIP Member
- Joined
- Apr 13, 2003
- Messages
- 2,105
- Location
- Coldwater, OH
- Country
- USA
- Snowmobile
- 18 50th Apex XT-X, 08 40th Apex LTX GT, 08 40th Nytro RTX, & 03 RX-1
Yamaha 8DNs here. Nelson's had a killer price on them during their Snow Show so I picked up two for $39 each.
STORM-CHASER
TY 4 Stroke Guru
[
[/quote]do they have a web site?
RobX-1
VIP Member
- Joined
- Apr 13, 2003
- Messages
- 2,105
- Location
- Coldwater, OH
- Country
- USA
- Snowmobile
- 18 50th Apex XT-X, 08 40th Apex LTX GT, 08 40th Nytro RTX, & 03 RX-1
STORM-CHASER said:
Storm Chaser, I'm sure that was just a special they were running during the weekend of their Snow Show. Here's their link:
http://www.nelsonsspeedshop.com/
MOTOWN SPEEDFREEK
TY 4 Stroke Junkie
I run the Ultamax 3,The stock yamaha belt burnt out to quick for me.plus these have warr. send back and replace for 7.00 for shipping. 
whits-end
Pro
I've never run anything but OEM on my RX, because of problems with my old 2 strokes.
Some of the aftermarkets are very hard compound, that's why they last.
2 problems:
Premature grooves on the primary faces.
Trouble controlling the shift RPM. They wanted to over-rev, and needed heavier flyweights.
Some of the aftermarkets are very hard compound, that's why they last.
2 problems:
Premature grooves on the primary faces.
Trouble controlling the shift RPM. They wanted to over-rev, and needed heavier flyweights.
Exact opposite diff with Yammie belts. 8DN oem belt is rock hard & ultimax 4432 belt is way softer.