Recent content by Beauryan Best

Stay far away from Chinese starters... They use trash parts like recycled soda cans cast with bubbles and brass bearings. Nothing except the hardware is interchangeable. Easier to just tear apart and have a look, I've reglued/epoxied loose magnets (jammed up ~ possibly your problem) this way and...

Secondhand OEM, identical to previous cable + oiled

One guy was having similar issues and it was his cable, but another guy ghosted the Forum after he was talking about having TPS at 20, too ~ should be illegal to do that

Tried searching a plethora of key words relating to my issue and not finding much

He'll even a TPS code would be loved right now

I would expect a code 84 or something to do with TORs atleast, won't even give me that decency.

Yes and no? Idk how many times I've tried setting it now... Interestingly, when checking DIAG. on dash, first option is TPS position and the manual claims it needs to be at 15-18, but mine is at 20... Flickers to 19, got it to stick at 19. Code went away, went for a ride around the block and...

Happened after a big snowstorm, riding... bogs down; won't drive, sounds like it's missing "vrom, vrom, vrom"... and if it doesn't die then it takes off and I gotta haul #*$&@ home.

Start. Check engine light yellow ON. Shut off. Check codes. 61 = 00 (no codes) but 62 says 1 (code)... what in the F!? Can't clear the 1. Check engine light stays on. It's intermittent and only comes on at idle, goes into limp mode, have to blip the throttle and if it doesn't die it takes off...

I'm having the same issue, code 22 & I plug in the sensor. Clear code. Start. Check engine light yellow ON. Shut off. Check codes. 61 = 00 (no codes) but 62 says 1 code... what in the F!? Can't clear the 1. Check engine light stays on. It's intermittent and only comes on at idle, hit 20mph and...

Same thing is happening to me, suggested fix?

Thanks man, Had an 8 hour Powerpoint class on the word, "Resilience," once lol... I think I'm going to check and clean these annually to avoid carbon build up for now on... honestly just been scared to take the IACv off because the Repair Manual almost specifically says "do not f with it; and...

My idle issue was solved after I cleaned up the junction ends (uncap, pull the 4 prong fuse/link, clean, reinstall) which had minor corrosion. Fixed Symptoms was the machine would die if I kicked it, shuffled the wires by hand, or messed with the throttle lever. Erratic Idle: I also cleaned the...

IT WAS MY IAC VALVE! Swapped it out for an extra Nytro IACV I had sitting around, cleaned out the tiny ports nice n shiny with q tips and throttle cleaner, and now I can't replicate the RPMs sticking/surging. I hope this helps the next guy, and I hope this headache doesn't happen to you. -...

Did you figure it out?