Recent content by DadsApex

I have two Bender Billet primary covers that need new bronze bushings. Is anybody out there making them or do I have two red paper weights lol?

Pickup coil.....just had it happen to the kids 95 vmax 600 two weeks ago, RMstator replacement as Yamaha part is discontinued.....just over an hour to change.....a bit of work to remove parts to gain access, cleaned up everything of rust and gunk while in there.....started first pull with new...

Also check Kijji Ontario there is a guy in Orillia who has tons of 4stroke parts but he does state no shipping, maybe Rockerdan can help you out as he lives nearby.

Try Bent Toys in North Bay Ontario

As far as I can tell, yes all the 2011 sleds with EPS have the larger diameter swaybar. Funny how they added the stiffer swaybar with EPS. So maybe that's what helped the 2011 and up corner better and not ALL the EPS? Thoughts?

Thanks for looking. If you come across one please let me know!

Can anybody confirm that the 2011 and up sway bar is close to 12mm. If so does anybody have a stock 2011 and up sway bar they would like to sell?

As far as I can tell from the part microfiche the my 2008 swaybar is 8FG-2386E-00-00 and all 2011 and up are 8FG-2386E-10-00 so I guess what I need to know is what's the size (mm) of the 10-00 swaybar.

I've looking through countless threads and really not sure what year/model did Yamaha go to the larger sway bar. As far as I can tell they went from a 11mm to 11.75 or 11.90 on just the 2011 and up XTX. Can someone please confirm this for me.

I was only able to use a 1" riser otherwise would have needed to get longer cables and brake line. I would think the Kodiak would be the same. I had to move the brake lever assembly inwards on the bars also because it was too tight for my liking. To go 3-4 inches your going to have to get all...

Your valves may need adjusting too.......

After some research i have found out the most you can go is 1". PowerMadd now sells a 1" and a 1.6" plastic risers for ATVs and said for Yamaha the most you can go with stock bars is 1". You can get an Isovibe set from another company but it's costly at $139 for the isovibe riser(2.5") and have...

Can i put a 2" riser on my Grizz without having to extend cables. I think there would be enough slack?

Hey guys, this has been bugging me since i have owned my 2002 Gizz 660. I bought it used with only 560kms on it in 2004 and when i am in 2wd on certain bumps i get a clunk like some thing is loose up front. I have checked for lose parts but found nothing. It seems to go away in 4wd drive but i...

I ran into a simlar issue last night, was going to clean the air filter and found quite a bit of black oil in the botton of the air box. I started cleaning it out and thought maybe there is suposed to be some in there to trap anything that gets in the airbox. It did have a gas smell as...