Search results

Well I finally got myZX2 in and what a awsome peice. Installation was very easy and it works better than anybody can say. The only thing that I wish I would have done different would do it the day that I baught the sled zero miles. Then sold all of my parts on ebay or craigs list and recooped...

Zx2 or AIR M10 I have the skid installed and it has more transfer ability and easier than any other suspension out there quick & fast. You dont even get under your sled to do it and you dont have to worry about braking the transfer rod. If you like to hook and pop wheelies like I do then do...

ripsaw cobra I am putting on a cobra right now with new rear suspension, these guys who are saying that they loose 3to 8mph with it I thinks it is in the dream meter not the actual mph. I think the ripsaw sucks for a all around good track it only good on hard packed groomed trails. I would...

M10 I baught a ZX2 by AD Bovin awsome thaught it was way nicer than the m10 I am in the middle of putting it together right now. with new track and all new bearings and seals chaincase and jack shaft bearings,. I am tired of the same w arm,twice lost count on boggie wheels. cracked my skid...

Gears Thanks for all the help had a small brain fart counting the wrong gear it is a 23/38 Thanks. Having trouble with reassemble of the chain case. Yamaha manual is a little vague on some of the washers and spacers. Any tips on bettter pictures

07 attak putting in my ZX2 and all new jack shaft and bearings and new cobra track. Had a question I have 18/38 with 35 flats on chain is this stock or how can I find out what stock is.

Oil use I have 07 attak I bought new I use about 1 qt every 350 miles my dealer said there was nothing wrong even under warranty .This is even before I did the mods so cant blame it on them. Mine also is in the air box. I have done a leak down and a compression test everything OK , they WILL...

Idler Wheels I think that the whole rear end and skid sucks they brake, don't last, and they bottom out to easy. I think that it is putting perfume on a pig!!! Replace it I am zx2 I am not putting another bogie wheel , high fax, w arm revalved shock, bushing , bolt, cracked rails, YAMI stuff...

headlight fix I re-enforced mine with 1/8 in aluminum and used rivits and 2 stage epoxy worked great . wish i had pictures to show next time i take off I will post. both sides broke off fixed them both

Zx2 or AIR M10 After Hearing mostly good things about the zx2 I think am pulling the trigger I Didnt get any feed back on the m10.or M20. Has anyone really triewd and liked it. I want a good ride with dependabiltiy without it getting to stiff. New cobra trac new bearings upper and lower Jack...

Zx2 or M10 air zx2 is one sid fits all 121 128 136 144 or maybe 162 what I liked about the zx2 over the m10 is that there is two different shot so you get smooth ride 75% and firm or stiff 25% of the time . Where the m10 air is set or fix when you pump it up. I ride fast and hard and need a...

Have alot of busted parts and bushings and cracked rails and bad boggie wheels 6 needed I am half way there in cost to a new suspension looking for some good opinions and experiences with these two. Dont nkow if I want to invest anymore money into a inferior products that will break again Thanks Joe

Broke my w arm for the second time. The first was cracked the second it came out in three peices.I aslo am having a problem with the nut on the upper bushings. Dont know what happens first the loosing the nuts and washers then the crack or crack and and then nuts come loose. I cant understand...

Check your front w arm or pivit arm if its cracked it will flex causing alot of ratcheting. then finally a snapping it. My pivit arm just came out in 4 peices took out the jack shaft bearing and the speed sensor. DO NOT USE THE OLD quench nuts for the W arm. they dont hold after u take them out...

I have 07 6500 miles my 10 to 12 boggies wheels, 3 bushings in front w ARM coming loose and falling out, 2 broken a W arms , 2 sets of exhaust donuts, 1 exhaust cracked and blew out a 2 inch hole. broke 1 transfer rod eyelet, jack shaft bearings with 1 speedo sensor, 1 belt,3 sets of high fax...

I had the heal clicker for my 06 apex after three trys and never could send me the right set up I gave it back to him with no expectaions of a refund witch he didnt.they may be a good piece if you know a set up. I put in ulmer in 2 07 attaks and they are awsome right on the money and worked...

MBRP Yes I mean mbrp and my stock gutted gets too loud and has a severe droan to it. Yamaha also did there homework on the exhaust beacause there is very little gain for the money. So , modifing the stock exhaust may ok but a little loud dodnt know if was the wright performance gain. Hauk I...

Has anyone used there exhaust they make a trail and race version. I have modified my stock and dodnt like it Excell looks great put pricy and is a single outlet.

The rattle is coming from the front hood the the hood doesnt fit tight on the the front u hook or what ever you want to call it I had the same rattle and I put my hand on the hood as it was doing it and it went away. so I put a shop rag around the bar and then installed the hood rattle gone

Oil Comsumption Well I got a chance to due a compression test and a leak down. I could not get a bore scope in the small sparkplug hole. I had 180lbs cranking compression and about 6% leakdown. The oil was dirty and smelled like gas with only 1500 miles on it plus a 2 1/2 quarts I added in...