Search results

Going to be adding a fourth wheel kit to my attak.I have oversized wheels on it know I didnt know if I should add a marginal wheel kit as well, and if I do should I put it towerds the back of the suspension on in the front or should i put both kits on. I do seem to be burning the slidders in the...

When removing the bearing are you talking under sled or on the side by the clutch

What is the best way to remove the lower bearing. Any hints

Budweiser Did you change the upper or did you just clean it.

Thanks when you say upper you mean behind the secondary clutch. How do you get the seal off to clean

I have a 2006 Yamaha Attak And at 2200 Miles I changed the Bearing below secondary Clutch. Now the sled has 4300 miles and I dont know what other bearings I should change if any. Thanks for any info.

I have a 2006 Yamaha Attak and the slidders keep wearing down in front of the inside wheels in the rear. All the boggie wheels are over sized. I was wondering if another set of wheels on the out side will help.

Just looking to see if anyone has changed gears. Im looking for more top end. Thanks for any info.

you can hear the pump but the sled dose not even crank over.

No it did the same thing. Would not start.

Mine did that and I put heat to the main fuel line after about 30 min it started.

Their is power I do belive. The gauge has power and we jumped the sled off another sled.

The sled was running great all season. Came back to camp shut the sled off now it will not start. You can hear the fuel pump cycle and when you turn the key you can hear one click that sounds like it is coming from down by the starter. Any one else have this same issue. thanks for any info.

WHEN YOU MOUNTED THEM DID YOU HAVE SHIM THE RUBBER STOPPER. IF YOU HAVE ANY OTHER INFO PLEASE POST WILL BE PUTTING SKIS ON THIS WEEKEND.

wHEN YOU MOUNTED THEM DID YOU HAVE TO CUT DOWN THE RUBBER STOPPER. IF YOU HAVE ANY OTHER INFO PLEASE POST WILL BE PUTTING SKIS ON THIS WEEKEND.

Just looking to see if any one is running the new x5.7 pilot on their apex/attaks and how they like the ski going to put a set on looking for any info.

I just bought a pair of the new pilot ski with the single carbide. I'm going to put them on my 2006 yamaha Attak. How will these skiis work and is their anything I should know about the install of these.(I bought the 506151233 stopper)