Search results

I bought and mounted one on my 2016 LTX DX. Works great. I could not get old belt off and new belt on without it on the 2016. Belt guard would not allow belt removal without removing belt guard

I have a 2009 A/C Z1 with nearly identical reverse actuator that had stopped working. I removed the actuator and pulled the cover off the drive motor for the actuator. All was fine under the motor cover. Pulled the commutator and worm shaft out of the actuator. Upon on pulling it out it was...

I added the JT outside tower bearing supports and his forth wheel kit. I grease the trihub bearings with a grease needle at the end of each season and expect to get many thousands of miles out of them. Good grease is the savior to any bearing, especially at the end of the season before summer...

I put the BOP soft spring in my 2016 LTX-DX before last season. What a difference. Made the sled so much more enjoyable w/o the high rev engagement of the clutch. I never ride much over 50mph so top end effect I will never notice.

I have an 2009 Arctic Cat Z1 that uses the same reverse actuator. First one actuator replaced under warranty. Second one also under warranty the next season. Out of warranty now so Googled "Arctic Cat reverse actuator". Found YouTube video on how to clean and fix reverse actuator. Took the one...

Any good bearing will suffice as long as they are greased annually. Over 20 years of riding and greasing all the bearings at the end of the season, the only bearings I have ever had to replace were those that you can not get to, to grease without total disassembly of an axle drive shaft or the...