Search results

Ok guys thx got myself a good asortment of various thicknes washers from a brg shop so i will be able to take out all the freeplay slop by shimming back side of gear Now upon re install what method is best for servo install i used yamaha service manual last time. thx all And especially...

Ok so you had stock shim plus the one you modified? How much float or freeplay was on top gear when you finished? Any or was it pretty tolight between c-clips? Thx again

Ok so you now have a stock shim behind upper gear plus the shim that has 0.4 mm removed from it? How did you remove the 0.4 mm from this shim?

Hey fellas thx i am tearing it apart this am I will put a yamaha order in this morning should have it by wed. Godspeedswe mentioned some mods to prevent this What are you guys doing? i will plan on that. Also on reasembly what method do you guys prefer for reverse actuator install? i used the...

Hey guys i writing this from the bar in hopes i can get a list of parts to order before i rip sled apart. Was riding at 100 k and no more fwd will go into reverse no issue but once selecting fwd major grinding noise!! Do i need a new uppere gear and reverse gear? thx in advance!

I changed all 4 brgs the two on chaincase side i did without removing chaincase. Once jackshaft and drive axle were out it was easy to pop them out with chaincase still in sled The upper seal is the tricky pary

Hi guys thanks for reminding me this will all hopefully be behind me once I hit the snow. There is only one large oring that seals each piston that's all that it. The whole caliper looks like something that came off a Chinese made minibike. Whoever posted about the beautiful srx caliper from...

Just thought I would post my latest issue as I have not seen anyone else with this problem. Aftter reassembling my chaincase and improving the tensioner and checking drive shaft bearing (thanks rockerdan) I ended up with another problem. I wish I had taken pics of what I encountered but didn't...

Thanks a lot guys great advice I msg rockerdan for some advice and also read his build thread very amazing thank you. I have replaced every brg in skid as well as jackshaft and drive. My only good news is jackshaft brgs and my drive axle brgs were all in decent shape but I replaced them all...

Ok is that what you guys are running 16 oz? My dealer told me 8.5 glad I asked/posted on here

Whats the part number for the cat 21 tooth please?

Hi Guys Just bought a used 2018 ltx le with 9500kms Sled was clean and well maintained. Decided to open it up starting with chaincase and lucky I did. 1 of the two tapered screws in roller had fallen out and I presumed got ground to dust. Is there a updated tensioner or just order a new one and...