Search results

he is probably still riding that beauty and too busy to reply....my 2020 definitely fires up with the key and handlebar button

When I got my 2020 xtx, I immediately put on c&a xcs skis. It was so hard to turn, I ran out of adjustment on all the springs, and ordered a stingray spring. Well shipping took way too long and I got impatient and installed stealth skiis. I liked the stealth skiis so much that I never took...

Count me in, I was just looking at these!

I would bet a good chunk of change that cat locked that up as an option for the first year and the srx will follow very soon.

The is an engine oil tank there, and then there is the chain case tank behind the engine oil tank. If you can figure out which kind of oil is on the ground, it will halo narrow down the fix. However, these sleds seem to spring leaks from that area in the off season, then are good again in...

I can just imagine how many thousands of lines of G-code hsm works spit out to mill those sheaves lol. Very very pretty

This is on my list of things to do... I've completely gutted the chain case pulled the track, F'd around with my suspension and wiring but somehow messing with these intake boots and anything to do with clutching makes me Very nervous. However once I overcome those 2 challenges, nothing much is...

What do you mean by tighten the middle? Should I pull in my limiter strap a hole? I have the stingray spring in there as well. Yes I will carefully pick my lines, I was told the opposite on the stop pointing up hill. Could you clarify a bit on that as well? I was told if you are climbing and...

Thanks, we are all Prairie guys going up for the first time. No expectations other than our should be alot of fun. There are two sidewinders going, mine and a btx. I think the other 3 are riding newer rmk and possibly a skidoo. If I fall in love, I'll simply buy a dedicated mountain sled, but...

I'm headed to crows nest pass for Jan 20. Am I going to be stuck all the time? Besides moving the skis in and making sure my limiter strap is all the way out, what else should I be doing to get the sled ready? I have a 250hp ecotrail tune, cai and the sled has a 2" paddle. I also have the rear...

I ordered what Dave said would work, the website has 2 options, stock wheels or big wheels. If you don't know all the specifics (which I didn't) of what to big is, how would you know you were getting the wrong thing? Especially when the owner says it will work? Either way I have decided that I...

I did this yesterday. Unplug the connector. Rotate back and forth to loosen things up a bit, then twist and pull at the same time. They are tight. Be careful not to break or put leverage on the connector.

Thanks for the replies. I got the hurricane kit off my sled as be changed over to the stock.... Wow that was tight. I had the skid out when I installed the wheels lol

They seem all the rage, wanted to get a better quality wheel, and bearing. Also want to upgrade the tensioner spool. The big wheel is not terribly more so that is the way I went

This is why short generic product descriptions are such a pet peeve of mine. In this case I called and talked to Dave, still didn't help me I guess, it looks like he was under the impression all 2020+ had 8" wheels.

The catch is that I have to send my wheels to him before he will exchange them. I'll lose a week for Christmas, then another week for them to get there, then somebody there has to open them up, figure out why somebody sent them wheels, then another week for the ones he sends to get to me... I...

Lessons learned. Dave will exchange with me. It will all be good and everybody will come out of it knowing more. My stock 3 wheel is still good, I'm not down and out because of it

I bailed on removing the manifold, couldn't get the hardest nut so I stopped. I figured that once jackshaft comes out (something I'm unwilling to do right now) I can get it from the bottom. I just bent everything back and will monitor it closely

Little late for that. Dave said his kit was pretty good. I decided to buy it since it was on sale.

Surprisingly a new part isn't all that expensive and with a bit of searching you can get a used one. Honestly I wouldn't bother with a repair, pretty sure my brother picked one up for around 30$