Lets us see those lovely Tapp Primarys on your Sidewinders

[Tarzan]

Pictures! Let us see your lovely Tapp Primarys here
And it would be great if you share what setup you use with it,springs and rollers and gear and track

 

[Todd Beenen]

Tapp primary,11.25 stm secondary, 24-45 Taylor gears-chain,1” track,196 1.450 woodys triggers. Ultimax xs811 belt. Whoops. Not on a winder though.

 

[Todd Beenen]

Tapp primary,11.25 stm secondary, 24-45 Taylor gears-chain,1” track,196 1.450 woodys triggers. Ultimately xs811 belt. Whoops. Not on a winder though.

It’s on this beast

 

[hman4]

Xs825 belt, stock secondary 35 straight helix with Dalton black orange wound at 70deg. I didn’t put any miles on it this year.

 

[Mitch Desorcy]

STM 11.25 secondary and TAPP Primary. On my 240 turbo viper.

 

[STAIN]

View attachment 161369 STM 11.25 secondary and TAPP Primary. On my 240 turbo viper.

Set up?

 

[Mitch Desorcy]

Primary was set up by Dave from Tapp so I'm not sure what's in there. Clickers are so nice for fine tuning. He set it up for my 240 horsepower. Secondary, running a 39/43 helix with a Green spring from Hurricane set at 70. Pulling 8950-9050 at full shift and 8900 at full throttle. Clutches Run so much cooler than my yammy clutches. Gears are 22/41. Top end of 126 mph.
Great back shift and NO RATTLE....

 

[STAIN]

Secondary, running a 39/43 helix with a Green spring from Hurricane set at 70

39/43 reverse helix? Or is it a 43-39?

 

[VyperNation]

Purchased through and set up for 270hp by Thunder Products. Installed with tune, thunder rollers and spring on stock secondary, then spring came a month early. Sooooooo, I have nothing to report yet.

 

[Phatboyc]

Tapp clutch new secondary coming soon

 

[STAIN]

Pretty piece.

 

[Kuzzy]

Tapp clutch new secondary coming soon
View attachment 164643
View attachment 164640
View attachment 164641
View attachment 164642

I can just imagine how many thousands of lines of G-code hsm works spit out to mill those sheaves lol. Very very pretty

 

[Upstater57]

Here is my set up on my 1100 with my Pro 4. Love this clutch.

 

[mainedrummer]

Refining setup for 375 hp on pump and 475 hp on Import

 

[markt111]

what type of difference are you seeing with the TAPP setup over factory? I know it is more adjustable and runs cooler but for the money there must be a significant performance edge?