Search results

And how do you like the 3" stock mod!

We got one! Tom, Tod and Chris

By chance, did you put motor casing on 180 degrees off. That would make motor run opposite direction

Yes, snowtrackers on c&a razors

When i bought my 17le with c&a razors, it had 9" shapers. It almost put me in the trees, just could not turn it! I am now running snowtrackers with cannondales center spring, works good.

Have you adjusted your center spring

So did they take the windshield off the doo? It is on in the video pic, but not there during testing.

X2 Awesome work Stevo!

In one of previous pics, there is spacers or nuts in between clutch tower and helix, I assume that could be the problem for clutch not closing enough when installed. Not sure why they would be there anyway.

By your pics, it looks like you loaded performance muffler tunes. I think you need to load stock muffler jukebox. Hopefully someone will confirm!

I am running snowtrackers on c&a skis with 160lb spring from cannondale. I am very happy with this setup. If I was you I would put on slim Jim's or snowtrackers and most likely need to change center spring to cannondales or cat 260 spring. Cat spring will have to go on upside down if your center...

Could it be bad bearings causing drag. Can you turn secondary with belt off. I would assume belt would be smoking hot if this was the case

We sure miss being there, tons of fun and great to meet everybody! We will be joining you in a toast for Onlyblue. Also big thanks to Mr Sled for all you do for all of us! Tom, Tod & Chris

We all know who put the time and money into fixing the problem, plenty of evidence of that here!

I am running c&a razor with sno trackers on my winder. They work, very light steering. I also have a bill mohr spring. I bought my sled used with c&a and shapers on it, it was terrible heavy steering. I almost hit a tree because I couldn't turn it!

My 17 LE (I bought used) the warranty expired 11/19. So only 3yrs on mine

I am running semi, but after getting some run time with them I would not be afraid to do the aggressives

I have c&a razor with sno trackers and spring from cannondale on my winder. They work really well with very light steering, I would highly recommend! I had shapers prior and they were a handful, very heavy steering!

My actuator gave me problems. I ended up replacing it, and all was good again. The motor was probally just wore out. Also make sure your belt deflection is correct, too tight and that will give you shift issues

Rf interference from the led lights?