Search results

sorry its a supercharger and has newer stainless y pipes and copper donuts

supercharged apex I noticed the boost is only 8.5 psi now it used to go to 12 I have a racepak dash and recorded a few runs it takes off with 12 on launch then I can feel engine pull down a little and this is were I have 8.5 psi ( that's why I recorded it) the boots look good and on tight the...

hid ok i see now yes they are very bright thanks everybody

hid they are 35 amp ddm kits but they draw like they are 55 amp do you think 7 amps is to much since stock is over 8 amps think its ok

ddm 35 watt h4 hid duall kt on 2006 apex ok im drawng 7.5 amp then it slowly goes down to 7.0 amp this is ddm 35 w kit on 2006 apex i get 7.0 amp and its 13.98 volts + need to check draw at high low connecton what is the stock draw on each bulb they sure are bright im afraid they may...

ground distribution my apex wouldnt run after i took those shunts apart i put dialectric on it and reassembled and still wouldnt run i cant remember all the codes one was tps i cut striped and soldered them all together their is also some with power ditribution also

wait till your button breaks off in the off position ask my wife how that happens she now has studs keep a sheet metal screw with you to screw into it to pull it up

switch you have tors and a ignition switch cut the button off or take it apart and disable it so it wont push down or connect/ disconnect the wires to disable

iac valve apex ok so on my supercharged apex at 12 psi how much boost am i loosing and were do you get the check valve

launchmaster is the launchmaster needed or usefull for a supercharged apex at 12 psi will this be hard on the engine , shorten belt life,or blow the throttle bodies/intercooler off and will the belts break (i run a car with psi c screwblower 2 step and its hard on belts) this sled runs...

cool videos martin mi ive been 3.70s their in a car (adrl) and on fire in a car when the blower came off cars are to much work i love my sleds

2 step yes i think its called a launch master hurrican on here sells them i think duane rister

stainless sorry replacement stainless y pipes

has any one broke the stock yamaha replacement stainless y pipes

121 apex how many studs can pull out before i should change track (i have 6 and 8000 miles on this track ) i have 144 down center is the ice ripper comparable to96 studs just need to keep the sled from spinning out on icey corners for my wife thanks

lets see some pictures of painted tunnels around the foot area mine always looks bad from boot scuffing and what is a tough paint /covering

fixed it fixed it left side of sled by the big injector multi plug cut the ground connectors out and soldered grounds together in both connectors and also did the red wires also while i was their thanks

codes bypassed tors and it still does it

help i washed the sled and now it wont rev up 84 13 15 acts like not getting fuel idles good

gogebic duane rister from alton my buddy from bethalto just came back and said all the off trail roads were good but the trails were thin this is green land/mass city/twin lakes and north he also said madison wi area looked good when they went up go to john dee it looks like it may warm...