Search results

I think it is a design issue, here is a pic. look how close the straps are to the cogs on the track, if you look at the left side you can see it has actually worn the bottom of the strap already on the edges. This picture is with 27 miles on the odometer. the right side is the Skidoo one I made...

LJ I'll have to look into that. What adjustment should I try? Wis sledder you can rule out bad material I used a skidoo limiter because they didn't have one in stock. Thats the one that failed.

Yeah I thought the first time was a fluke because I have never had one fail on any Yamaha. Now it happened again with only 300 miles on it.

I know its warranty but it's hard to warranty something they don't stock and that means downtime on a new sled waiting for parts! Wis sledder what dealer is yours at?

Has anyone else had this problem? I had 27 miles on my XTX and went to adjust my limiter straps up one notch. The left one was halfway torn through. I replaced it and adjusted them up one notch, 300 miles later the other side is tore in half. I see it is different design from the 08's that use a...

Take it to a machine shop and have it aluminum welded and save a few bucks! Thats what I did, no problems since.

Kevin 09 XTX The Handwarmers are terrible! Come on Yamaha step up to the plate!

I actually like the feel of the Apex bars better. They have a beefier feel with the solid grip. It doesn't feel like your holding on to shrink wrap like on the 09 bars. The Apex bars also have the removable and adjustable hooks. They are about 1/4 lower so I added 3 small washers under the...

Nytro guy, place a wanted to buy topic on the classifieds, thats what I did, I'm sure they are going to be a hot item now. I don't think you will be able to order them since Yamaha ran a bulliten on them. I would say 50-100 bucks for a set would be fair, seeing that a set of aftermarkets grips...

Exactly! The Nytro is already in Parallel, You don't need the harness, so plug in the orginal 06 Apex bars and enjoy the heat. The 09 XTX grips measure about 7 Ohms and the 06 grips are about 3 Ohms.

I second that! I put the 06 apex bars on my XTX and I have nice toasty hands. The Apex bars have a better feel too in my opinion Plugs are the same. Why doesn't yamaha step up and cover this for us?

Arnold08, No warranty, insurance is covering though 1100 smackers.

FYI, I want to clarify that I did not bend my subframe, it was my lower A-arm and steering rod, but still it wasn't that hard of an impact. Maybe one theroy is that they made the A-arms bend easier so it doesn't damage the subframe on the 09's ? I don't know. All I am saying that I have been...

Thats a coincidence, My last sled was a Warrior too. There were times on my other yammies that I didn't even want to get off and look at my front ends after hitting rocks, roots, and what not and I never had this much damage from hitting something so minimal. My local trails opened yesterday...

I FEEL YOUR PAIN! I Had the same thing happen to me, 25 miles on new XTX riding around neighbors field, hit a 4x4 landscape timber at an angle going about 10 MPH, small jar but nothing major, hand never even came off bar. looked at left side suspension it was pushed back 2 inches. took to dealer...

how about a part # for the longer dzus fastners? Thanks.

Rockmiester, I see your tagline says you have an 05 Warrior. I had an 04 and all I did was wire my grips in Parallel. I kept it hooked through the ECU and only had to run 1 or 2 bars on my display and I had toasty hands. If It got below -25 turn em up half way and they were like curling irons...

would this possibly work on the Nytro? I found it in another post. I like the idea! What I did on my sled was run two sets of warmers. I took the 06 bars, removed the hooks and knocked out the threaded inserts inside the bars then installed heaters inside the bars. Welded the threaded...

Bummer!

Has anyone just wired the grips in parallel? I did that on my warrior and they were awesome! Sure you couldn't run them on full bars or you would blow the fuse, but you would only have to run 2-3 bars on the gauge and your hands were nice and toasty. Anyone try this on the Nytro? Thanks.