Search results

My rev limiter kicks in at 11000 RPM's and form what I have been told it's suppose to kick in at 11250. Can anyone verify the RPM of the rev limiter? If 11250 RPM's is the correct cut off it stands to reason that my tachometer is off 250 RPM's. If this is true then the ideal RPM range for my...

I am looking for recommendations for a snowmobile lift.

What is the acceptable amount of toe out, mine is at 5/8".

How sensitive is the transfer rod adjustment? I HAD mine set between minimum and half and I just changed the setting to just over half. When I first got my sled I adjusted it for less transfer to help eliminate some of my inside ski lift and it seemed to have worked. Today I added a 12mm sway...

For those of you who are going to or have installed the Power Commander III it is important that you set the throttle position values especially at the closed (0%) throttle position. Basically you need to set the values so the PCIII knows what throttle position value, or reading, is fully...

I have to replace my TPS and the manual doesn't cover the TPS adjustment. Does anyone know the procedure? Any help would be appreciated.

I just tore apart the sled and inspected the donuts by just taking off the clamps. In the picture below you can see the donuts between the manifolds and the headers and from what I can see they look good. Can you tell by what you see in the pix if they need to be replaced or do you need to...

Just tinkering in Photoshop......would be nice though!!!

I'm looking to get a GPS and would like opinions on what mounts well on the Apex and works well in the cold and wet weather.

I have Pilot skis and am looking to upgrade my carbides. Looking for positive or negative feedback and recommendations on either bar. Also what size is everyone running in the center? :Rockon: :Rockon: :Rockon: :Rockon:

What factory options would like to see on the sleds? For instance I would like to see a dash mounted GPS, a built in compass or a heated shield pig tail.

Just wondering who is satisfied with the HP on their Apex/Attat/RTX. If your not, what HP range would you like to see Yamaha take their muscle sled to? I for one would like to see it in the 170/180 range.

I would like input from anyone with a OhlinsEC shock regarding the feed wire to the shock. I am thinking of upgrading my shock to the Ohlins and I’m wondering if the problems out weigh the benefits. Could you please tell me if you have had one wire break, more then one wire break, if you...

I am looking for first hand experience reports on the performance of the 07 EC Ohlins mono shock. I know the 06 had issues with leaky seals bottoming and wires breaking. I would like to hear if these issues have been resolved with the 07 shock.

I recently installed an Excell Exhaust. When I nail it at lower RPM's it hesitates or stumbles, and also makes a popping sound. I also have the CR10EK plugs. I tried adding fuel using the procedure with grounding the pale green wire and changed the adjustment on the display. I have it bumped...

Here is my sled with painted Excell replacement panels. I had someone try to match the color with one color paint but it doesn’t match. I just ordered the factory paint form Color Rite so it will match the rest of the sled.

I was fortunate to have the opportunity to do some riding in the U.P. Saturday. We rode 135 miles in a variety of conditions from snirt to 16" of powder. I have several new mods and here are my opinion and the results. 1. White Knuckle Exhaust.......Nice tone but after about an hour of...

Just got off the phone with the parts department at my dealer. Verified there was a change in the chain case cover for 07. Old # 8FR-47543-00-00 new # 8FR-4753-01-00. Only difference is the 1. It appears that there are other changes to the chain case. This is from Highlands Yamaha web site...

I was wondering if anyone has word on the Power Commander III that was talked about for the Apex in the spring. I found one on this site http://www.morepoweracing.com/prodtype~ ... ry~cat.asp for the 2006/2007 Apex but did not find one on the Dynojet site. Any help would be appreciated.

Can someone with a 07 Apex or Attak post a photo of the new grips and give an update? Do they get hot? If so how long does it take for them to get hot and are they comparable to the RX-1's as far as heat?