Search results

The speed sensor RTV let go on my last ride,causing the sd_42 fault code.I have the sensor back in with new rtv but now the code wont go away and the sled wont go in reverse.Is the reverse thing a result of there being a current code? And how do I clear it? I'll be finishing up my summer storage...

Does anyone know of a retailer here in Canada for the GSE kits? I recently watched Toms video of the install using all Cat and Yamaha parts so I started pricing up some of the things here. The most expensive part,obviously, is the steering unit itself at roughly $2200 Can, so I figured it would...

Can someone chime in here with the installed length for the front skid shock spring? I had a stiffer ELKA spring last year and it was too much. I couldn't get enough weight on the skis,so I'm going back to the original one for now. I saw an older thread with a Cat part number for a stiffer...

Who is using a Wix filter on their Winder? I see the specs for the one that crosses from the Yamaha filter,and it looks like it is taller than the Yammy filter so I'm not sure it'll physically fit in there. No I'm not advocating one filter over the other,but I can get Wix locally rather than...

I have been fighting an issue with my studded '19 SRX chewing up idlers. I used a Woodys 137" 2.86 pitch template to do the track and figured I had the right one, but just recently I see specific templates for the quiet pad tracks with those goofy pads on them. How many of you all used the...

I posted last season about the studded track on my '19 SRX chewing up idlers and thought I had a cure with a rubber tired Kimpex wheel,but by the end of the season at least one of them had been destroyed as well. I can't be the only one with this issue, surely. What are guys using for idlers...

I am at the point where the flyweights, at the very least, will need to be changed on my '19 SRX primary. Right now the roller bushings are still good but I may change them to keep the tolerances the same between the weights and rollers. Is there any decent aftermarket options for bushings? In...

How sensitive to the coupler block adjustments are the 137 skids in the SRX in relation to ski pressure? I swapped out the stock Tuners in the fall to Slydog Attacks and have only had a couple opportunities to try and tune the ski pressure where I want it,and as of yet am unsuccessful. The...

Has anyone swapped the factory water pipe type clamps on their sled over to constant tension ones? Seems like they worked so well on the 2 stroke sleds that it would be a no brainer to put them on the 4's.Might be something for Travis to work on,put together a whole sled kit ,or at least...

Has anyone got a step by step on the lower steering pivot bushings install? I see a few pictures including the rivet removal of the reinforcement plate etc, but this would be a great thread to have to help those of us getting set to tackle this job.

I could have sworn I saw billet torsion spring holders for sale somewhere but for the life of me I can't find them now.Is there a company making these? There must be a better alternative to the stock plastic ones.

I've seen the mod that is offered by Rocztoyz for the thumb and grip heaters on the Winders but I also noticed this too. https://www.yamaha-motor.ca/en/accessories/snowmobiles/handlebars-controls/performance-grips/SMA-8JP61-00-BK?sourceCategoryCode=158 Has anyone tried these or another set of...

Are the front bumpers made by aftermarket companies able to fit all year procross chassis? There's one for sale locally listed for the '12-17 years range but mine is a '19.

I can't seem to find much info on this topic so here goes. Are all Slydog skis made to fit the same carbide size? As in having the same stud C-C? Woody's makes a couple options for Slydog skis but I read somewhere that C&A carbides will fit too? I have the Attack model skis so if I can get some...

Can someone confirm that JT wheels will fit the inner idler position now?I am trying to find a wheel that'll last with studs.The last 2 inner skid wheels lasted 145 miles and they are now destroyed.I've tightened the studs twice now,to the point I'm thinking the aluminum nuts are at their max...

I've searched with no luck and even had to call the local dealer who was no help either.Is there a part number for the filter that snaps onto the fuel pump itself? No parts diagrams I have looked at yet have it,only the Y section with the 2 end filters.Do you have to buy the whole pump to get a...

'19 SRX all stock and yesterday it started backfiring and hesitating for no real reason. Was working like a champ until our group fueled up then a couple miles down the trail it started hesitating and backfiring.My sled was the only one doing this out of 12 so I wasn't sure what to think. I...

What info is stored in the gauge cluster? I have some damage to the back of mine and it wont lock back into the mounting hole due to a piece missing from the round locking mechanism.If I have to change the gauge to another one will I have to take it to a dealer to have the info like mileage...

I was searching through my service and owners manuals for fluid capacities for my '19 SRX and could not find a specs page with these on it. I remembered seeing the page on this forum under SRX specs so I got the info I needed. Was the pages in the specs listing taken from a different manual? Or...

Of all threads I can find on the Winder front bumper,none state just what is required to remove/replace one.I will upgrade the one on mine eventually and would like to know ahead of time what I need for fasteners and how the old ones are accessed and removed. Also does the Cat one fit or not? I...