Search results

Is there much of a difference between ulmers kit and BOP oilite bushing kits? I picked up a used 2013 Apex ER model. If i remember right the kit I put in my 2012 XTX from ulmer there was 2 spindle bushings that were the wrong size or something and I couldn't use them. This was 8-9 years ago...

Picked up a non running project. I cleaned the $40 knock off carb and it runs good at lower rpms but stumbled bad above 1/4 throttle. The neutral indicator light only comes on when in neutral then you push the shifter down and find the sweet spot to get it to light up. No big deal there yet...

Upgrading the pontoon outboard and was quoted end of July or August on a 175 Vmax SHO. He said all the big Yamaha outboards are going to be a long wait. Demand must be really high, you'd think there would be mountains of motors in the spring that were built in the off season?

I was checking a few things out yesterday and set secondary spring to 50 like everyone suggested on the orange spring. I noticed with a small amount of forward pressure on the secondary it does not want to slide and float. The machined splines are pretty rough and it's not easy to move it side...

Looking to swap out the stock 129 2.86 rip II 4 studs per bar to a 128 x 14 (or 15 wide) 2.52 rip II studded up the middle with avid drivers. 14 wide would give plenty of clearance in the tunnel. Anybody with any experience with this yet? My drivers need to be shifted towards the chaincase...

Looks like this might not be the best thing on the winder, with stock spring anyways. Rocket to 100 then blah afterwards. Secondary is shimmed, TP rollers and all looks good there including offset. Stock cover is going back on until a different primary spring is found. Rtx se, stock, 1000...

Pull out all washers and aluminum sleeve if you have an old shock collar laying around use it to compress spring. Could even make something like this from pvc pipe. Think I'll keep it in tool kit until I get a belt adjuster that has this feature built in.

Where did everyone from Michigan put the big ugly green Michigan registration sticker at?? It's terrible!! Lol

I put on new limiter straps but removed the old ones before I had the new ones. In less than 1000 miles they are starting to get chewed up some, maybe from folding the wrong way. I wrapped them around the bars from the front, wondering if the wrap direction is correct or not? Does anyone...

Is there a list/map of the vendors? What I'm looking for is if there will be a Triton Trailer dealer at the show?

Or am I missing something? A guy at work picked up A 120 and was asking me some questions about them. He wants to tweak it so his little guy can race it some. Where is the best info on these kiddy sleds??

Been smelling gear oil after running 80+mph on rr grades for a few miles at a time. I can smell it on the normal slower trails too sometimes. Can touch the case for a second but thats it, its as hot as the oil tank. Since the first ride I noticed it, I had the upper bearings replaced and a...

Looking to replace factory helix bushing with a better one like the bushings that are in most aftermarket ones. Any idea who to call? Thanks

Just put on the tall touring mega shield from the assy catalog. The headlight pod seems to flex a lot and at 80 - 90 mph it pulls pretty hard on the pod. Kinda wondering if the if it will stay together on a all out WOT run? Anybody ever have any issues running over 100 mph with this set up...

2012 XTX, always been a great runner, never had the low rpms when it was new like most have. Just been getting better and bettter. 4000 miles on it now and I think it was hitting on the rev limiter on a long pull on groomed trail. All bone stock with a good belt. It looks like it has 3.1...

? Thinking about trying this with a predator track and dropping the protectors down. Maybe shim the exhaust up too. Any thoughts??

Wow do the SLT skis work great on a 2012 XTX. Drives straight as the Tuners and aggressive like a single keel ski should be. Very nice ski. Wanted to post because I don't see many people trying them, works great with the EPS.

I took a few GoPro vids on a couple different UP trips. They are short 3 or 4 min each, I saved them in my library and then try to upload them to you tube and a 3 minute video takes 144 minutes to upload??? That can't be right?? Wtf am I doing wrong?? Any help is appreciated, Thanks

Wonder if the tried and true 8DN is the belt for this sled or if it's a 200.00 Cat belt? Any dealers at the show see this and notice?