Search results

filters and nos Black 1000, Thank you for your reply. If you had pictures or general info re the install ( do you position the nos nozzle into the filters or is there some type of carb plate??) and where the bottle might go ( it looks like there should be room ahead of the filters) it...

No sign of winter at all in the east, it is 6 degrees C and more like spring here in NS rather than nearly Dec. Got to looking at some pics from our annual trip to Quebec and thought I'd post a few. We still get winter out here - it has just moved five hours north up the road from where I...

NOS set up with filters NOS-PRO, Any thoughts on this set-up?, which manufacturer might have the best kit? I've really not heard from anyone who has done this yet but someone must use filters with nos and not the airbox?!! I'd appreciate any thoughts! Peter

NOS with filters ?? anyone have a comment. Somebody must run NOS with filters ( CPR uses the same K&N type as ECP ) Clutch set up is as per Matt at The Speed Shop ? NOSpro ? anyone!! Peter

I have an 05 RX1 with Simons CPR supertune kit - filters, evac, carb rings, jetting and clutching changes ( installed and tuned by Dynoray on this forum ). I'm basically happy with this kit ( even though I did lose some top end - best only 104 mph on hard pack - it definately accelerates...

I thought I'd update the thread from November \ December on how the 05 RX1 worked with this kit on. Winter is still non existent in NS - the first complete write off in my lifetime that I am aware of. However, I just got back from an 1122 mile, 6 day trip from Pt. a la Croix, Gaspe region...

Re: ECP vs. CPR kit RX1Jim, I bought the CPR supertune kit from Matt at The Speedshop this fall. This thing wakes up the bottom and mid-range big time - however like some others on TY I have lost a bit of top end - max mph 103 -105 on a hardpacked snowlane at our local lake dragstrip. I...

Simons CPR Supertune kit Re the two questions the kit uses the stock primary spring and I have not done anything to the stock silencer yet but am waiting to talk to Jeff Simons about that. In previous posts he mentioned that he has a simple mod that is beneficial - I have'nt got a hold of him...

re supertune kit rx1007, The CPR Supertune kit comes with K&N filters (same filter as the ECP kit I'm told) but with machined velocity stacks that press fit onto the carb mouth and a complete evac system ready to install. It completely replaces the stock airbox setup. It comes with a...

As per previous posts I had ordered a Simon's CPR Supertune kit from Matt at The Speedshop and had it installed locally by DynoRay up here in NS. Monday night had a chance to hit the freshly groomed and hard packed railline - AMAZING difference from stock!! Great sound, hard pulling right...

RE: windshield statement I had this on my Rich Daly ( DynoPort ) built 180hp 99 Formula III: " If it don't scare ya a little, it ain't worth owning " It always got a lot of attention at the pit stops. I always got a kick out of the guys with all kinds of BS on their sleds but who...

Re: crack in dash The crack occurred from the inside of the temp gauge at about the 4 o'clock position towards the speedo. The worst part is I replaced the center dash section - being even more careful to drill the hole, file the edges and not overtighten the gauge mounts - and it $%$#@$**...

Evac Kit Here's a picture of the evac kit that comes with the Simon's CPR supertune kit. "Self-draining" according to CPR - I've not had it on the snow yet as just installed this season so I can't say how it will work. Has some type of one way reed valve type affair at the outlet...

Re: Temp Gauge Install I fish-mouthed then silver soldered the brass fitting to the transfer tube on the mag side of the head after drilling the appropriate sized hole for the temp sensor. Painted it before reinstalling and it has a nice clean look. One problem I ran into was of the dash...

Where did the picture go! Maybe I don't have this picture thing figured out! Here it is again!

Could'nt resist posting this shot from last season now that I've got this picture thing sorted out. This was at Island Lake, NB late last season. As one observer said " guess Yamaha has that weight transfer thing figured out"!! A lot of people who had'nt seen an 05 that worked well...

CPR Supertune Kit Dyno Sheet Here is the printout from Dynoray's Dynomite clutch dyno. Sorry about the poor quality picture - it is simply a digital photo of the page and not scanned on. As noted above peak hp 142.6 @ 10600 rpm, peak torque 80.1 ft. lbs @ 8000 rpm.

more pics another view

Pics of CPR Supertune Kit Installed Here it is on the sled

RX1 Power kit pics I think I finally figured this out with some much appreciated help from another TY'er. For all you non-believers out there here is the CPR Supertune Kit as delivered from Matt at The Speed Shop. It looks and sounds great. Now let it snow!