Search results

Reverse over snow flap Don't cut the snow flap off, you will cause the sled to overheat. Mine does the same thing, I thought about putting some aluminum straps vertically to keep it from sucking up, any other ideas?

I want to buy a Klim Valdez Parka, found a price of 322.14 shipped from Motofrugals in UT and I live in MI, Shadtree had them for 20% of list of 378.99 early in the year but not now. Does anyone know where I can do better than 322? Thanks

I feel sorry for anyone that does not at least pull their shafts and put some more grease on them. From what I seen from the factory it wont last long without corrosion. Has anyone else pulled their 05 skid? What do the people who have think?

All the cross shafts and bushings are the same as the old pro action skid, aluminum shafts and black plastic split bushings, and there were always zerks there in the past. The only exception is at the top front 2 pivots they are the nylatron type bushings. This is the only spot you may not need...

Oh yeah I had a hard time getting the new style skid back in. Easier to get into the track but to get the rear bolts in I had to loosen the spring preload and use a ratchet strap to colapse the suspension a bit. Tried moving the coupler both ways but i didn't seem to help. Make sure you have a...

I live in MI Sled, old screen name is Sledhead but can't get it to work so jimrx1 now

Not as bad as it sounds, used 1/4-28 zerks and used a 1/4-28 nut for the boss. Need to tig them to keep the heat to a minimum, looks factory. but I thought I would let everyone know-no grease on the shafts=corroded shafts in a hurry.

Just got done installing zerks in the rear suspesion. Had to tig weld bosses so the zerks didn't hit the shafts, 5 different places. Hardly a spit of grease on the stock shafts from the factory.

Pilot jets OK I am going to clean the pilots. This is my first 4 stroke and I looked at the parts drawing. Are the pilots on the side of the carbs? Looks like it but I just want to be sure. Thaks for all the help!

The sled was snow checked so the gas is old. I put in a gallon of fresh gas though. Its in my pole barn right now no criiters. Thanks for the help

My 05 rx1 will not stay running. Ran it in the barn a couple of times and then seemed to foul the plugs. Put in a new set and now it will not run without 1/4 or 1/2 choke. As soon as the choke is of it totally dies out. The warning light stays on without flashing and no other indicator lights...