Search results

  1. 0

    Face plate bushing on primary

    Easy job , did mine in a vice took 10 min .
  2. 0

    Ripsaw 1.250 vs 1”

    Can anyone clarify something about the ripsaw track ? my friend was looking at the ripsaw tracks and noticed that the 1” ripsaw is rated to have more (ON TRAIL TRACTION) then the 1.250 does this seem right ? thanks
  3. 0

    2018 sidewinder xtx 137 rear springs

    Didn’t the 2014 vipers have stiffer rear springs ?
  4. 0

    Longest Lasting Rollers

    Anyone familiar with the 4 hole magnetic clutch weights ? I have a set of ssi arms I could use to add more weight then the stock arms
  5. 0

    Longest Lasting Rollers

    The guy told me I would loose rpm ?
  6. 0

    Longest Lasting Rollers

    Should I add or remove weight to compensate for the bigger roller ?
  7. 0

    Need input on 16 mm rollers effect ?

    Doesn’t lower rpm mean it’s loading the motor more ?
  8. 0

    Longest Lasting Rollers

    I'm going to be putting the 16mm clutch rollers on and would like to know how they will affect the shift vs stock rollers ?
  9. 0

    Need input on 16 mm rollers effect ?

    I got some 16mm clutch rollers for my winder and would like to know how they will affect the shift vs stock rollers ? Thanks
  10. 0

    Longest Lasting Rollers

    They look like this
  11. 0

    Like it hit the limiter then backfire then code 26

    My sd_26 went away with just with the key cycle . It started to do it without any codes showing , after 3 or 4 times trying to get on it the code showed up ! Removed hose 26 and plugged air box nipple . This is what I did for now , not pretty but ............
  12. 0

    Like it hit the limiter then backfire then code 26

    Outside source !
  13. 0

    Like it hit the limiter then backfire then code 26

    Did you try blowing through it while applying voltage 3volts ?
  14. 0

    Like it hit the limiter then backfire then code 26

    Mine was the first one on the clutch side took it off and put a hose on it and blew through it while applying 3vdc to the noid , oily water came out , problem solved ( for now )
  15. 0

    Like it hit the limiter then backfire then code 26

    Update ... called the dealer and he said to remove and clean the electric valve with the hose going to the air box also to remove the hose from the valve to the air box and cap off the nipple on the air box and just remove the other end of the hose from the electric valve . I put 3volts to...
  16. 0

    Like it hit the limiter then backfire then code 26

    Yes 91
  17. 0

    Like it hit the limiter then backfire then code 26

    I found this on motoneigequebec it’s worth a try !
  18. 0

    Like it hit the limiter then backfire then code 26

    No everything is stock !
  19. 0

    Like it hit the limiter then backfire then code 26

    Yes I will try to heat them up with a hair dryer . Up stream is a little vague tho !
  20. 0

    Like it hit the limiter then backfire then code 26

    went for a ride today -20 sled ran fine for most of the ride then all of a sudden when I wanted to accelerate it felt like it hit the limiter so I let off , tried to go at it again same thing tried again and it let off a backfire ??? Now I have a code 26 . Could this have caused the code


Back
Top