Search results

I put a set of 8 tooth drivers on my 2003 RX-1 and it gave me lots of clearance.It originally came with the 9 tooth.I would also recommend the extrovert drivers to stop the ratcheting and plus you can run your track a lot looser and makes it easier on the slide rails.By installing the 8 tooth...

I just purchased rear shocks for my 2003 RX-1 and they are Elka brand name with tripple rate springs.Does anyone have any input of where to start with the initial set-up? Thanks Jeff :o|

Does anyone have any experience with the rear Elka shocks for the RX-1?I am just installing them and any info would be appreciated. Thanks Jeff

Where did you get the muffler-is it from any local muffler shop? Jeff

I just hope it is as good as they say!I emailed the company and they said that there was not enough demand for the snowmobile shocks. Jeff

They were made from a company in Quebec but only made them for a short time.Now they make shocks for quad runners,motorcycles,etc, but not snowmobiles.Just check out Elka.com. Jeff P.S nice sled!!!

Thanks for the info.I guess I will have to just experiment with these shocks until it feels good.I will have to contact Elka and try to find out just where to start. Thanks again.

thanks

Thanks

What is the difference in single,dual and triple rate springs? Jeff

Did you check the voltage with it running?It should be around 14 volts.

Not sure about the code but check your wiring harness under your drink holder under the tool box and make sure it is not rubbing on the chasis.Alos chec the connector on the regulator and make sure it is not corroded.I had these problems with my machine. Jeff

I just purchased rear shocks(used) for my 2003 rx1 and was wondering on the initial set-up.I am 200lbs dry and ride fairly aggressive.Can anyone help? Thanks Jeff

Also check the harness up on the left front where your drink holder is located and you may find the harness rubbing on the chasis.This is common on these sleds and mine was also rubbed there and caused it not to start one time. Jeff

I ahd the same problem with my 2003 Rx1 and I found the terminals on the connector going in to the voltage regulator corroded.Remove your airbox and I think it is the black box that is the voltage regulator--it has the bigger wires going to it.I replaced 2-3 terminals and cleaned up the...

Should they both be around the same temp?

When you the clutches should be cool,do you mean you should be able to lay your hand on them?Also with the primary clutch,will you get some heat transfer from the engine? thanks

Thanks ,I will let you know how this works out-but it may not be for 3-4 weeks.

This is what was recommended for the initial set-up--hole #1-- 1/4" allen screw -hole#2-- 3/8" sleel fastener -hole#3--7/16 steel fastener + 1 thin washer. To be honest my riding season was really short last year and not alot of time for testing.Thanks for your info and as soon as the snow...

First I have to thank you for your patience and quick response's.The only problem I have is that it will take another month before we get enough snow to try this.Thanks again,Jeff