Search results

So far so good. I tested it the other day and it was working fine. I update this thread after I get it out for a longer ride.

I was able to figure it out. I wasn’t twisting it enough before pushing the helix down. I twisted it a good 1/2 turn. Once I’d that everything is back together and running good.

First thanks for all your help. I added another shim and the belt started screeching. Took the secondary back off remove the shim. Put it back together and same screeching. Am I not twisting the clutch enough when I am putting is back together?

You have me worried. I don’t have any plastic tabs and not sure how I could turn the helix. I can try and upload a video if that would help. Thanks!

There is only one shim. I am adding another today.

Ok finally go the belt in and that didn’t work. I am going to try the shims now. When putting the clutch back together. It appears A1 is stock. Do I have to turn the helix at all? Or as long as it is lined up with Hole A and hole 1 it is good?

So the 09 has the update? I Have not tried a new belt. It has the 8GK belt on it and it looks pretty new.

Mine are at 1400 rpm when warmed up.

Thanks everyone. I am waiting for the shims to come in and will give it a shot.

Do I need a compression tool to take the clutch apart?

I bought a 09 phazer with 1700 miles. It appears that it does not want to go into reverse or drive unless I rock the sled or pickup the back end. I have been reading a lot on the problem and it seems to be a common issue. The fix seems to add a shim to the secondary clutch. I am new to sleds and...